+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: RMW ANNOUNCEMENTS (/forumdisplay.php?fid=35)
+----- Forum: RMW X-1 (/forumdisplay.php?fid=87)
+----- Thread: RMW X-1 the solution to track day excitement! (/showthread.php?tid=2063)
RE: RMW X-1 the solution to track day excitement! - CFMINI - 12-06-2014 02:14 PM
Jan -
That intake will move some serious CFM!! The thick steel deck plate - looks like about 20mm - allows you to increase the stroke plus it gives you a very stable place to anchor the sleeves - correct? What is the Bore vs. Stroke dimensions to get to 2.0 L? What kind of con rods are you going to use?
Craig
RE: RMW X-1 the solution to track day excitement! - Jan - 12-06-2014 05:00 PM
95.25mm stroke x 80mm bore
it's running even longer rods than the 1.8L, custom timing chain , chain guides etc
12mm head studs vs 10mm
The sleeve has a better lip on it and it's set deeper in the deck plate for more rigidity
should be better
RMW X-1 the solution to track day excitement! - Penis - 12-06-2014 07:01 PM
I want to see the damn thing stretch its legs... Preferably on one of the "hills" here in CO.
I'm a DICK! Dont like it? Skip this post!
RE: RMW X-1 the solution to track day excitement! - CFMINI - 12-06-2014 11:20 PM
Jan -
80mm bore x 95.25mm stroke x 4 cylinders=1915 cc=116.8 ci. The undersquare bore vs. stroke ratio of .83/1 should make it a torque monster.
Craig
RE: RMW X-1 the solution to track day excitement! - ColinGreene - 12-06-2014 11:55 PM
Saw that post coming.
RE: RMW X-1 the solution to track day excitement! - Jan - 12-19-2014 07:31 PM
quick pic of the fuel cell in the car with the battery
![[Image: 20141218_125413_zpskckpsvob.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/20141218_125413_zpskckpsvob.jpg)
picture of the steering wheel with paddle shifters
![[Image: 20141218_144506_zpsxjdxsinc.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/20141218_144506_zpsxjdxsinc.jpg)
Wiring harness has been completed but we don't want to put anything electrical in the car until we are done welding.
Really happy with the car at this point. Still waiting on parts to get here from sponsors. Bad thing about Holiday's is they slow everything down. Hoping to have it done for Mini Thunder.
RE: RMW X-1 the solution to track day excitement! - mini_racer - 12-19-2014 07:42 PM
Great progress, looking good.
RE: RMW X-1 the solution to track day excitement! - astrochex - 12-22-2014 10:39 AM
Such a beautiful build!
You must be like a proud papa, Jan.
RE: RMW X-1 the solution to track day excitement! - Jan - 12-22-2014 12:32 PM
dying to drive it..............
Re: RMW X-1 the solution to track day excitement! - minimark - 12-22-2014 01:48 PM
So close, I'd be laying awake at night thinking about it!!