+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: RMW ANNOUNCEMENTS (/forumdisplay.php?fid=35)
+---- Thread: Vibratechnics group buy. (/showthread.php?tid=711)
RE: Vibratechnics group buy. - HRM - 05-29-2012 01:57 PM
(05-28-2012 08:48 PM)colingreene Wrote: i was thinking i need to put mine on.
40 minutes for a fat guy with a bad back who is not happy leaning over a hood. You shouldn't have much of a problem.
for an early 04 this is what I did and worked well.
put on lift
wheel off
lower E12 torx off
jack under engine bracket area just to see the engine move so I know it is there.
Top hose and wire bracket(whatever you call it) bolt off just move it to the side 1/2 inch
Ground wire off
Get airgun
Fire wall mount bracket bolts off and removed that lateral bracket.
4 mount to block bolts.
The entire bracket comes up and off with a tilt. The engine has plenty of wobble after you just jack it up 1 1/2 inch to wiggle it on/off easily.. Plenty of room front and back to take the mount bracket off with an airgun and 4 inch extension.
Old mount off
New one on
reverse.
RE: Vibratechnics group buy. - astrochex - 05-29-2012 07:27 PM
(05-29-2012 01:57 PM)HRM Wrote:(05-28-2012 08:48 PM)colingreene Wrote: i was thinking i need to put mine on.
40 minutes for a fat guy with a bad back who is not happy leaning over a hood. You shouldn't have much of a problem.
for an early 04 this is what I did and worked well.
put on lift (cheating!)
.
.
.
Re: Vibratechnics group buy. - AudioNToxication - 05-29-2012 07:32 PM
Just be careful with the wobble part when taking the bolts out of the top bracket. Mine wobbled well more like dropped, and managed to break one of the two locking methods for the cam position sensor and knock it loose. If I did it again I would put the floor jack under that end of the engine to avoid the drop.
Sent from my DROID RAZR using Tapatalk 2
RE: Vibratechnics group buy. - ColinGreene - 06-12-2012 01:05 PM
Any Interest in another group buy?
RE: Vibratechnics group buy. - Guest - 06-12-2012 01:10 PM
I'd like the upper and lower engine mounts.
Late 2006 build please.
RE: Vibratechnics group buy. - minisandpirate - 06-12-2012 06:34 PM
im down for a Aug 03 to replace that TSW mount
RE: Vibratechnics group buy. - Hound_va - 06-12-2012 06:47 PM
(06-12-2012 01:05 PM)colingreene Wrote: Any Interest in another group buy?
I'm interested in a upper road mount for an '06 MCS as mine just died. I guess it would depend on how long it would take to get everything together for a group buy instead or just calling the UK.
RE: Vibratechnics group buy. - ColinGreene - 06-12-2012 08:31 PM
when i order it its usually there in 4 days max. group buy or not. They only ship priority.
RE: Vibratechnics group buy. - Davisflyer - 06-12-2012 09:26 PM
I'm interested, 2006
RE: Vibratechnics group buy. - Guest - 06-13-2012 06:02 AM
Oh, I forgot to specify street for mine.