Aquamist HFS-3 and MINI Tank GB - Printable Version +- RMW Forums (http://revolutionmini.com/forum) +-- Forum: RMW (/forumdisplay.php?fid=1) +--- Forum: Announcements (/forumdisplay.php?fid=24) +---- Forum: Vendor Announcements (/forumdisplay.php?fid=25) +---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237) |
RE: Aquamist HFS-3 and MINI Tank GB - ThumperGP - 08-30-2011 07:18 PM (08-30-2011 07:15 PM)silhouette88 Wrote: Nice killerfox! At 44% IDC and my driving style, the one gallon tank I have is lasting me about 3 tanks of gas, and I avg about 1 tank per week. If I had your 2 gallon setup it'd be 6 weeks between water/meth fill-ups. I must drive like an old lady or something. Looking forward to more pics of the install. ~Chris How do you not floor it?? Lol...people keep asking me how long a tank lasts, and I really have no clue...I'm flooring it constantly! Cool setup Killerfox! RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 08-30-2011 07:48 PM (08-30-2011 07:18 PM)ThumperMCS Wrote: How do you not floor it?? Lol...people keep asking me how long a tank lasts, and I really have no clue...I'm flooring it constantly! I know huh? I think it's a combination of two things. 1) Before today I didn't have any methanol to refill my tank, so I was kinda babying it. 2) After that fuel cut incident I think subconsciously I'm afraid of it happening again so I let off on the throttle instead of going WOT. But now that I have the 5 gal. pail we'll see if my habits change. RE: Aquamist HFS-3 and MINI Tank GB - ThumperGP - 08-30-2011 09:25 PM (08-30-2011 07:48 PM)silhouette88 Wrote:(08-30-2011 07:18 PM)ThumperMCS Wrote: How do you not floor it?? Lol...people keep asking me how long a tank lasts, and I really have no clue...I'm flooring it constantly! Well you can't be afriad of #2....you need to try to reproduce it to diagnose it. RE: Aquamist HFS-3 and MINI Tank GB - RennSport Racing - 08-30-2011 11:33 PM just bought one of these.....(those silver kegs next to the meth drum are beer kegs). 200L of race methanol RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 08-30-2011 11:40 PM The methanol drum is nice and all, but I really want to know why you have all those beer kegs??? RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 08-31-2011 07:19 AM haha why NOT have all those beer kegs?! And not to be a jerk but a side note, 20oz methanol and 5 oz water makes 80% mixture. I know its rough, but 18.75oz methanol then fill to 25 with water will yield 75% w:m. Prob nothing crazy difference, but if you're aiming at 75%, you'll end up saving more methanol in the long run =) I need to find out who supplies methanol in the 5 gal drums in CT, and for 3.25/gal would be full of win. Whats distilled water going for now a days? used to be pretty cheap by the gallon... RE: Aquamist HFS-3 and MINI Tank GB - RennSport Racing - 08-31-2011 07:56 AM (08-31-2011 07:19 AM)BostonR56S Wrote: haha why NOT have all those beer kegs?! haha i have three of those kegs. I like to brew beer.... for distilled water, do what I did. Just buy a distiller. The water tastes great, and you can use it for coolant water and battery water. RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 08-31-2011 08:26 AM (08-31-2011 07:19 AM)BostonR56S Wrote: haha why NOT have all those beer kegs?! LOL - touché! I might be doing it wrong but I thought that for 75% methanol concentration you should shoot for around 80% methanol by volume? Plus, I was being lazy and wanted to use the existing marks on the cup. You're right though, it's not that hard to just figure out what the 18.75 oz mark is and get a sharpie. But do you know if it's 75% ABV or ABW? I was basing it off of this Methanol Tech Sheet. Or maybe it doesn't even matter unless you're getting tuned for a specific concentration, as long as you're consistent with your measurement. I guess that makes sense. RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 08-31-2011 08:50 AM yea it shouldnt make much of a difference regardless, as not being tuned for it basically relies on the ecu to compensate. Does your TMAP read the lower temps yet? or are you still seeing right around ambient? RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 08-31-2011 09:00 AM (08-31-2011 08:50 AM)BostonR56S Wrote: yea it shouldnt make much of a difference regardless, as not being tuned for it basically relies on the ecu to compensate. Does your TMAP read the lower temps yet? or are you still seeing right around ambient? Cool thanks, that will make it easier to measure then. I'm seeing very slightly lower inlet temps, but I'm still on my first tank which Jeff says he mixed at roughly 35-40% methanol / water. I should be at the point where I can try 75% in a day or two and I'll post up my numbers. |