+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: ROTREX Superchargers (/forumdisplay.php?fid=66)
+--- Forum: Rotrex kits (/forumdisplay.php?fid=67)
+--- Thread: RMW 30-94 Rotrex kit (front mount) (/showthread.php?tid=110)
RE: RMW 30-94 Rotrex kit (front mount) - ColinGreene - 10-12-2011 06:43 PM
oh you know what, I dont know off hand but i can be sure to check for you tomorrow, Its the same size we use with standard race tires. I want to put it up on the lift and check everything as i rotate it through. preliminary checks indicate it will fit fine.
RMW 30-94 Rotrex kit (front mount) - Mike S - 11-08-2011 11:15 AM
Jan, out of curiosity. What is the normal oil temperatures at idle for the Rotrex and what is it approximately at high RPM?
RE: RMW 30-94 Rotrex kit (front mount) - Andrea - 11-08-2011 11:58 AM
if I'm right.. the inlet temperature cannot excede 80°C..
RE: RMW 30-94 Rotrex kit (front mount) - Mike S - 11-08-2011 12:32 PM
The oil? Wow, that's pretty high. So it's similar to engine oil temps.
RE: RMW 30-94 Rotrex kit (front mount) - Jan - 11-08-2011 06:19 PM
ideally keep it below 175deg F, we have never seen it that high, usually around 120-130 on track
it will get higher at idle
RE: RMW 30-94 Rotrex kit (front mount) - Mike S - 11-08-2011 10:07 PM
Ahhh great, thanks Jan!
RE: RMW 30-94 Rotrex kit (front mount) - Chase - 11-11-2011 11:03 AM
love how wide. now it needs wide arches. te he.
RE: RMW 30-94 Rotrex kit (front mount) - ColinGreene - 11-18-2011 02:11 AM
![[Image: 2011-11-04_12-27-35_89.jpg]](http://i821.photobucket.com/albums/zz135/Silversmoke06/2011-11-04_12-27-35_89.jpg)
![[Image: 2011-11-04_12-27-13_986.jpg]](http://i821.photobucket.com/albums/zz135/Silversmoke06/2011-11-04_12-27-13_986.jpg)
This is our completed catch can system. I put these pictures up because we were asked about it. If theirs any other questions people have please voice them here and ill see if i can cover it or find a picture for you.
RE: RMW 30-94 Rotrex kit (front mount) - R35P3CT - 11-18-2011 02:16 AM
I am assuming the oil filter got relocated?
RE: RMW 30-94 Rotrex kit (front mount) - ColinGreene - 11-18-2011 02:40 AM
no, still there the catch can is hung off of a random plastic boss thats on the divider. the filter is part of the housing. to move it i would have to delete it entirely. and run lines. somthing i wanted to do but
couldent find a better place for it than where it is.