You are not logged in or registered. Please login or register to use the full functionality of this board...
RMW Forums
RMW X-1 the solution to track day excitement! - Printable Version

+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: RMW ANNOUNCEMENTS (/forumdisplay.php?fid=35)
+----- Forum: RMW X-1 (/forumdisplay.php?fid=87)
+----- Thread: RMW X-1 the solution to track day excitement! (/showthread.php?tid=2063)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

RE: RMW X-1 the solution to track day excitement! - Shanne - 05-05-2015 10:29 AM

Like this

RE: RMW X-1 the solution to track day excitement! - Jan - 05-05-2015 10:31 AM

it's dash 6 on the return.........not worried about it yet

RE: RMW X-1 the solution to track day excitement! - Shanne - 05-05-2015 10:54 AM

Doesn't matter, I have watched them add 15% IDC to a 91 map at 380+WHP. Even more with E85. The tube is about the same size as -6 but the sensor its self shrinks the ID where it detects what ethanol content to about -4.

RE: RMW X-1 the solution to track day excitement! - Jan - 05-05-2015 11:09 AM

I have more than enough injector for the hp I will be running..........when it becomes an issue I will change it
I need to get it running asap

RE: RMW X-1 the solution to track day excitement! - astrochex - 05-05-2015 12:35 PM

Good luck Jan. Not that you need luck, of course.

RE: RMW X-1 the solution to track day excitement! - Shaun r53 - 05-06-2015 09:53 AM

Why can I not see the pictures?

RE: RMW X-1 the solution to track day excitement! - Jan - 05-06-2015 10:30 AM

Wiring harness going in along with the 2.0L RMW Deck Plate engine.........
OS GIKEN Twin Disc billet clutch/flywheel
[Image: 20150505_142137_zpshjc5hxhd.jpg]

Waiting for it's 2.0L stroker to jump in: Tongue
[Image: 20150505_142329_zpsocywhbvn.jpg]

Wheel Speed sensors in
[Image: 20150505_142341_zpsao0nkh2g.jpg]

Brake Pressure sensors in along with balance bar
[Image: 20150505_142356_zpsrjie2pbz.jpg]

Sadev Sequential box with hydraulic throw out bearing
[Image: 20150505_150411_zpssmxtsvmj.jpg]

[Image: 20150505_144718_zpscbpvrizb.jpg]

Custom 300M sway bars with Tarett Engineering blades
[Image: 20150505_144533_zpsc50bb3up.jpg]

[Image: 20150505_144524_zpsbetooysv.jpg]

[Image: 20150505_151027_zpser8w5t47.jpg]

[Image: 20150505_171654_zpsvxaecovi.jpg]


RE: RMW X-1 the solution to track day excitement! - ColinGreene - 05-07-2015 08:52 AM

needs more brap sounds.

RE: RMW X-1 the solution to track day excitement! - Dave.0 - 05-07-2015 12:14 PM

Hey you know the motor and the fuel tank are at the wrong ends of the car right? LOL

Look great

RE: RMW X-1 the solution to track day excitement! - Jan - 05-22-2015 01:33 PM

Making sexy time...............Big Grin

[Image: IMG951112_zpszbzfz8so.jpg]