+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - killerfox - 09-01-2011 07:57 PM
I starting installing the Kit tonight and I was able to run the wires from the pump and the tubing under the trim on the passenger side of the car all the way to the engine bay. I never had to go under the car.
It got dark outside so I will have to finish tomarrow but I think I will only need about 2 more hours and she should be operational.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 09-01-2011 08:01 PM
Awesome! Great news!! I'm getting very excited for mine to ship out
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 09-01-2011 08:01 PM
You are an ambitious man. Looking forward to seeing the kit in a Clubman.
RE: Aquamist HFS-3 and MINI Tank GB - killerfox - 09-01-2011 08:04 PM
all that is left to do is tap the ECU and drill and tap the nozzle. Then just just button up everything and go buy some METH.
(09-01-2011 08:01 PM)Howerton Engineering Wrote: You are an ambitious man. Looking forward to seeing the kit in a Clubman.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 09-01-2011 08:13 PM
What tap and drill sizes r u using? I need to know for reference as I don't have a tap set anymore
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 09-01-2011 08:16 PM
(09-01-2011 08:13 PM)BostonR56S Wrote: What tap and drill sizes r u using? I need to know for reference as I don't have a tap set anymore
11/32" bit and 1/8"NPT tap
Aquamist HFS-3 and MINI Tank GB - LASRGUY - 09-01-2011 08:53 PM
Got my tracking# today. Can't wait! It will surely take me much longer to install than some of you guys. Picked up a 5 gallon jug of methanol today at High Tech Performance in Van Nuys. $4.45 a gallon. Not bad!
RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 09-01-2011 09:10 PM
So I anxiously drove home to mix up my 75/25 meth cocktail. ThumperMCS kind of got me worried saying I'd be spilling it all over the place but not to worry as it evaporates quickly. I popped the seal off the flex spout and started pulling the spout out and saw a bunch of meth filling into the neck cavity and then it covered the entire top of the pail. I was like, how the hell am I going to pour this into my mixing cups without losing most of it. So I said eff it and tipped the pail over...perfect pour into the cup. Didn't spill an ounce.
But then I got paged and had to do some work. I'm driving up to the meth lab tomorrow morning to meet Jeff, so I'll do some data logging on the way up, and back, to see what kind of IAT's I get. Can't wait!
(09-01-2011 08:53 PM)LASRGUY Wrote: Got my tracking# today. Can't wait! It will surely take me much longer to install than some of you guys. Picked up a 5 gallon jug of methanol today at High Tech Performance in Van Nuys. $4.45 a gallon. Not bad!
I never thought I'd say this to a guy but...nice jug! Did you get that from High Tech or did you have it already? That looks way easier to use than my pail.
(09-01-2011 08:13 PM)BostonR56S Wrote: What tap and drill sizes r u using? I need to know for reference as I don't have a tap set anymore
LOL, just noticed your sig Boston. FTMFW alright!
RE: Aquamist HFS-3 and MINI Tank GB - LASRGUY - 09-01-2011 09:50 PM
(09-01-2011 09:10 PM)silhouette88 Wrote: I never thought I'd say this to a guy but...nice jug! Did you get that from High Tech or did you have it already? That looks way easier to use than my pail.HaHa! I did get the jug at High Tech. It was about $20. The shape should allow a smooth pour and there's a small air vent that you open when pouring to keep it from gurgling.
RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 09-01-2011 10:04 PM
(09-01-2011 09:50 PM)LASRGUY Wrote:(09-01-2011 09:10 PM)silhouette88 Wrote: I never thought I'd say this to a guy but...nice jug! Did you get that from High Tech or did you have it already? That looks way easier to use than my pail.HaHa! I did get the jug at High Tech. It was about $20. The shape should allow a smooth pour and there's a small air vent that you open when pouring to keep it from gurgling.
Very nice. I paid about $18 just for the 5 gal pail and spout. If they carried a jug like that I would have gotten it. I'll see how this pail fares. The neck of the spout isn't too durable, the sales guy at ERC recommended leaving the spout extended instead of pushing it back into the can, otherwise the plastic may crack over time.