+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - LASRGUY - 09-16-2011 01:03 PM
Quote:Do you have the failsafe hooked up? If so, you are tripping the failsafe.I do have the failsafe hooked up. Looks like maybe I need to adjust some settings DIY the fault levels.
This is why I did not want to set it up...I had a feeling it would cause more headaches than I already get with this car.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 09-16-2011 01:07 PM
Wait, you get headaches with this car??
(09-16-2011 12:59 PM)ThumperMCS Wrote:(09-16-2011 12:47 PM)LASRGUY Wrote: Got my system up and running today! The car does feel strong. I'm getting a p2883 wastegate valve signal code after a few seconds of full boost. It seems to be tied to the water level light coming on. I'm wondering if the level sensor is not adjusted properly. The tank is near full with 50/50 water/meth. I've got the 0.7mm jet installed and got about 290cc/min in doing a flow test.
Do you have the failsafe hooked up? If so, you are tripping the failsafe.
This is why I did not want to set it up...I had a feeling it would cause more headaches than I already get with this car.
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 09-16-2011 01:07 PM
(09-16-2011 01:03 PM)LASRGUY Wrote:Quote:Do you have the failsafe hooked up? If so, you are tripping the failsafe.I do have the failsafe hooked up. Looks like maybe I need to adjust some settings DIY the fault levels.
This is why I did not want to set it up...I had a feeling it would cause more headaches than I already get with this car.
One thing you could due for now is to set the Low Flow trip full CCW and the High Flow trip to full CW. Just leave them there until you have every thing else adj. and settled down.
RE: Aquamist HFS-3 and MINI Tank GB - ThumperGP - 09-16-2011 01:09 PM
(09-16-2011 01:03 PM)LASRGUY Wrote: I do have the failsafe hooked up. Looks like maybe I need to adjust some settings DIY the fault levels.
Yep!
Are you seeing the proper flow on the gauge? I had an issue where it would come up to say 3-4 bars, and then go down to 0. I was certain it was flowing just fine based on my testing with it spraying on the windshield while driving around. Turns out though, the jet was faulty.
(09-16-2011 01:07 PM)Buli Wrote: One thing you could due for now is to set the Low Flow trip full CCW and the High Flow trip to full CW. Just leave them there until you have every thing else adj. and settled down.
Exactly where mine are set.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 09-16-2011 01:13 PM
If you're spraying on windshield, then the nozzle port is open, no? Wouldn't that cause a nice boost leak?
RE: Aquamist HFS-3 and MINI Tank GB - LASRGUY - 09-16-2011 01:14 PM
Jeff just called and confirmed that I just need to go through the calibbration process. It's on his site. He also comfirmed the quick fix of full ccw on WL and full cw on WH.
RE: Aquamist HFS-3 and MINI Tank GB - ThumperGP - 09-16-2011 01:18 PM
(09-16-2011 01:13 PM)BostonR56S Wrote: If you're spraying on windshield, then the nozzle port is open, no? Wouldn't that cause a nice boost leak?
There is a plug the screws into the adapter
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 09-16-2011 01:25 PM
niice. I got the kit this morning. Fedex showed it had delivered. I left work for an hour to go home and get it, since I won't be back till probably around midnight, so I didn't want it sitting outside my apartment that long.
I brought it in and quickly opened it up to take a look, everything seems VERY detailed and packaged nicely for a smooth install. I didn't realize how tailored to the R56 this was. Also, I liked the touch on the cap of the tank.
Will be installing it next week, as the gf is visiting this weekend.
RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 09-16-2011 02:09 PM
(09-16-2011 01:25 PM)BostonR56S Wrote: Will be installing it next week, as the gf is visiting this weekend.
Hrm...maybe you're coming down with a cold and can't see her this weekend. *cough* *cough*
Looking forward to hearing more feedback on the Aquamist. The crowdsourcing effect is just starting, I can't wait to hear how the different configurations are working for people.
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 09-16-2011 06:28 PM
Alt: for Autocross no alcohol rule
-Water/Methanol ratio: 100/0
-Threshold: 12 o'clock
-Gain: 12 o'clock
-Jet size: 0.6 mm
-Flow restrictor: 0.9 mm
-Thoughts: Tested gain setting from full CCW to full CW and had no detachable power gain or loss.