+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 10-19-2011 01:44 PM
(10-19-2011 11:33 AM)ThumperMCS Wrote: Welcome to the out of warranty party
Can you get a video of the noise? In general, the whole R56 valvetrain is incredibly noisey...
It sounds exactly like the same metal/metal smacking sound you get with the "death rattle" except instead of being able to put your ear up to the front of the engine (as in the passenger side), you can tell its definitely coming from the center of the engine (where the coils are), aka the cylinders
RE: Aquamist HFS-3 and MINI Tank GB - ThumperGP - 10-19-2011 08:09 PM
(10-19-2011 01:44 PM)BostonR56S Wrote: It sounds exactly like the same metal/metal smacking sound you get with the "death rattle" except instead of being able to put your ear up to the front of the engine (as in the passenger side), you can tell its definitely coming from the center of the engine (where the coils are), aka the cylinders
That's concerning...lol
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 10-19-2011 09:38 PM
Thanks Blake. At least I got an iPhone 4s now
Lol
RE: Aquamist HFS-3 and MINI Tank GB - RennSport Racing - 10-19-2011 10:22 PM
My car does that too.
RE: Aquamist HFS-3 and MINI Tank GB - ColinGreene - 10-20-2011 01:51 AM
mines in and done, just need to back the threshold off a bit. and find a way to hook up the dimmer wire.
Not a good night on the Dyno, my clutch has finally given up the ghost. Otherwise i would have made 280 possibly
RE: Aquamist HFS-3 and MINI Tank GB - ThumperGP - 10-20-2011 09:50 AM
(10-19-2011 09:38 PM)BostonR56S Wrote: At least I got an iPhone 4s now
Lol
Yep that's all that matters! If our cars blow up we can just ask Siri what to do
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 10-21-2011 12:59 PM
Anybody using a jug other than the one they buy their methanol in to store it?
I saw VP has some race fuel ones, are they sufficient for storing methanol?
or would the plastic gas tanks work? I heard somewhere it won't, but want to make sure what I can and can't....
RE: Aquamist HFS-3 and MINI Tank GB - killerfox - 10-21-2011 01:14 PM
I purchased the VP plastic 5gal container with a long pour spout and it works fine.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 10-21-2011 01:28 PM
Do you actually store your mixture in there? It'll evap if not airtight right? Or do you just use it when you need to mix your solution and use it to pour?
And do you have a good way of getting it out of the 5gal jug without pouring it all over yourself? lol
siphon?
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 10-21-2011 01:39 PM
(10-21-2011 01:28 PM)BostonR56S Wrote: Do you actually store your mixture in there? It'll evap if not airtight right? Or do you just use it when you need to mix your solution and use it to pour?
And do you have a good way of getting it out of the 5gal jug without pouring it all over yourself? lol
siphon?
This is what I use.
I know it is expensive, but I fill the meth tank on average every two days and plan on haveing it for a long time so it will be cheep per use.