+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 07-28-2011 12:09 PM
Yes, on the 56 the unit will recognize the cooler IAT, as long as the jet is before the TMAP, and adjust accordingly.
It will also adjust fueling a small degree as well.
RE: Aquamist HFS-3 and MINI Tank GB - LMFiorillo - 07-28-2011 04:16 PM
Please ADD ME to the list.
I have an R52 with left driving position and approx. 230cv. Injectors are RMW 450cc. I need a Red gauge face.
Fluid percentage and tank position, whatever is recommended.
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 07-28-2011 04:57 PM
(07-28-2011 04:16 PM)LMFiorillo Wrote: Please ADD ME to the list.
I have an R52 with left driving position and approx. 230cv. Injectors are RMW 450cc. I need a Red gauge face.
Fluid percentage and tank position, whatever is recommended.
Done. Thanks.
If we can get 20 to sign up I'll include a right angle jet adapter for free in all the kits.
90 Degree Jet Adapter
This can make the install of the jet in certain areas much simpler. The bottom side of the IC on the 53 is a good example.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 07-28-2011 06:06 PM
How about fittings for a rubber pipe install location
(07-28-2011 04:57 PM)Howerton Engineering Wrote:(07-28-2011 04:16 PM)LMFiorillo Wrote: Please ADD ME to the list.
I have an R52 with left driving position and approx. 230cv. Injectors are RMW 450cc. I need a Red gauge face.
Fluid percentage and tank position, whatever is recommended.
Done. Thanks.
If we can get 20 to sign up I'll include a right angle jet adapter for free in all the kits.
90 Degree Jet Adapter
This can make the install of the jet in certain areas much simpler. The bottom side of the IC on the 53 is a good example.
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 07-28-2011 07:12 PM
We have them available but I can't afford to include them for free, sorry. We manufacture the jet adapters so we have a little more leeway with them, the rubber tube adapters are bought in, in small quantities.
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 07-28-2011 09:54 PM
Is it this?
http://www.howertonengineering.net/products/2.0%22-Boost-Tube-Coupler-%28each%29.html
Didn't realize the price lol wouldn't have asked had I known :-x
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 07-28-2011 09:57 PM
(07-28-2011 09:54 PM)BostonR56S Wrote: Is it this?
http://www.howertonengineering.net/products/2.0%22-Boost-Tube-Coupler-%28each%29.html
Didn't realize the price lol wouldn't have asked had I known :-x
No this...Rubber tube adapter
RE: Aquamist HFS-3 and MINI Tank GB - BostonR56S - 07-28-2011 10:00 PM
Ah, got it. Trying to picture how that'd work, I guess it acts as a threaded spacer almost that is inerted into the hose perpindicular to it?
RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 07-28-2011 10:02 PM
Oops! LOL, I didn't realize your site had the same pics. Sorry about that Jeff.
(Removed link to plagiarized site)
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 07-28-2011 10:03 PM
(07-28-2011 10:00 PM)BostonR56S Wrote: Ah, got it. Trying to picture how that'd work, I guess it acts as a threaded spacer almost that is inerted into the hose perpindicular to it?
There's a few small pictures under the main one that show it in the tube. You drill a small hole in the tube, then push this through. Is soft rubber it may not seal too well. In stiff silicone type hose it works great.