+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - HbSean - 11-05-2011 06:21 PM
Yeah I'm just gonna use a ratchet
Aquamist HFS-3 and MINI Tank GB - HbSean - 11-05-2011 09:00 PM
I'm under the car right now where do I route it after it went through the rear frame rail ? I know it says outside of the tank but I don't see where I could get it past the tank with out having the loom sticking out
edit: Got it, now tapping the ECU
Aquamist HFS-3 and MINI Tank GB - HbSean - 11-05-2011 11:54 PM
I tap the orange and grey wires with the red and green wires for the DI correct ?
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 11-06-2011 12:57 AM
(11-05-2011 11:54 PM)HbSean Wrote: I tap the orange and grey wires with the red and green wires for the DI correct ?
Orange and white with red and green to control by injector duty cycle.
Aquamist HFS-3 and MINI Tank GB - HbSean - 11-06-2011 01:06 AM
Alright good I'm on the waste gate wire I'm going to hold off on map sensor as that's for the fail safe correct?
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 11-06-2011 01:21 AM
(11-06-2011 01:06 AM)HbSean Wrote: Alright good I'm on the waste gate wire I'm going to hold off on map sensor as that's for the fail safe correct?
Nope, waste gate is for the fail safe. Map is for alternate control if not using injector duty cycle.
Aquamist HFS-3 and MINI Tank GB - HbSean - 11-06-2011 01:23 AM
Ah so I just need to tap 2 wires other then the power? I was just going off the wiring diagram
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 11-06-2011 01:28 AM
(11-06-2011 01:23 AM)HbSean Wrote: Ah so I just need to tap 2 wires other then the power? I was just going off the wiring diagram
I think that is correct.
RE: Aquamist HFS-3 and MINI Tank GB - HbSean - 11-06-2011 03:35 AM
Ugh fucking time change, I thought I was going crazy lol
Calling it a night All I need to do is get bolts for the flow meter and Tap the pipe for the jet then reinstall everything and get the control unit working.
Thanks for your help Buli
annnd a 90% chance of rain tomorrow
RE: Aquamist HFS-3 and MINI Tank GB - ColinGreene - 11-06-2011 11:35 AM
Do not tap through the waste gate.
If you need help today I am available and will help for the cost of lunch.
PM me if needed.