C38...........is it possible? - Printable Version +- RMW Forums (http://revolutionmini.com/forum) +-- Forum: ROTREX Superchargers (/forumdisplay.php?fid=66) +--- Forum: Rotrex kits (/forumdisplay.php?fid=67) +--- Thread: C38...........is it possible? (/showthread.php?tid=813) |
RE: C38...........is it possible? - ColinGreene - 04-09-2012 10:44 AM a decent 3 axis new is around 100k. craig would know better but i would think 100 or better. Re: C38...........is it possible? - minimark - 04-13-2012 04:42 AM Probably could about walk from one to another in Mooresville.... RE: C38...........is it possible? - jcw2006aus - 04-20-2012 09:51 PM Jan/Colin, what sort of fuel pressure will there be with the 1000cc injectors and booster pump? Is it worth monitioring the pressure? Cheers, Mark RE: C38...........is it possible? - Jan - 04-20-2012 10:09 PM (04-20-2012 09:51 PM)jcw2006aus Wrote: Jan/Colin, you shouldn't have a problem. I have a return system on mine but once I test it , it will be obvious for sure RE: C38...........is it possible? - ColinGreene - 05-17-2012 07:22 PM RE: C38...........is it possible? - astrochex - 05-17-2012 07:34 PM ^ is there any clearance between the runner and the C38? RE: C38...........is it possible? - Shanne - 05-17-2012 08:13 PM Jan, with any of the rotrex's have you seen lots of vacuum when you close the throttle body, being that its preintake. The reason I ask, is I know if you put the throttle body in front of a turbo it helps with spool and all that because it creates a vacuum in the system and in a vacuum there is no resistance, so the wheels spin MUCH easier.....I think it would be different though because its coupled to a belt on the motor....just wondering. RE: C38...........is it possible? - Jan - 05-17-2012 09:17 PM (05-17-2012 07:34 PM)astrochex Wrote: ^ is there any clearance between the runner and the C38? yes (05-17-2012 08:13 PM)Shanne Wrote: Jan, with any of the rotrex's have you seen lots of vacuum when you close the throttle body, being that its preintake. The reason I ask, is I know if you put the throttle body in front of a turbo it helps with spool and all that because it creates a vacuum in the system and in a vacuum there is no resistance, so the wheels spin MUCH easier.....I think it would be different though because its coupled to a belt on the motor....just wondering. it's driven by the belt, it doesn't matter as the shaft only spins by pulley speed RE: C38...........is it possible? - Shanne - 05-17-2012 09:28 PM (05-17-2012 09:17 PM)Jan Wrote:(05-17-2012 07:34 PM)astrochex Wrote: ^ is there any clearance between the runner and the C38? Its what I figured. Just though I would ask. RE: C38...........is it possible? - michael bradley - 05-18-2012 10:50 AM Jan, just curious who did you get to do the CNC work? |