+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - RennSport Racing - 11-17-2011 08:35 AM
ah, apologies. Misread
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 11-17-2011 08:52 AM
(11-17-2011 08:15 AM)KittyMini Wrote:(11-17-2011 07:57 AM)BostonR56S Wrote:(11-16-2011 06:25 PM)etalj Wrote: That's not expensive. I payed $280 for a 53 gal drum
we were saying its dirt cheap, not expensive... $125 for 55 gal
I paid $50 for my 5 gal... lol
That's how much it is at the closest place here..... $50 for 5 gal.
How much does everyone go through a week?
Now that I have the ice tires on for wenter, a gal will last me two weeks. Before that I went throught two gal a week or more.
RE: Aquamist HFS-3 and MINI Tank GB - HbSean - 11-17-2011 04:32 PM
Drums(53gal) are $407 here and 5gal pails are $28 for non VP and $41 for VP M1
I'm gonna try the non VP stuff..
RE: Aquamist HFS-3 and MINI Tank GB - Howerton Engineering - 11-17-2011 05:25 PM
(11-17-2011 04:32 PM)HbSean Wrote: Drums(53gal) are $407 here and 5gal pails are $28 for non VP and $41 for VP M1
I'm gonna try the non VP stuff..
I used Sunoco and some "industrial" brands before without issue. As long as it's pure it should be fine.
RE: Aquamist HFS-3 and MINI Tank GB - ColinGreene - 11-17-2011 05:54 PM
HbSean, pm me where your getting yours.
Aquamist HFS-3 and MINI Tank GB - LASRGUY - 11-19-2011 10:18 PM
I'm noticing occasionally, especially when the engine is cold, that under mild throttle the meth spray will come on at only a few psi of boost and initially spike to full flow on the gauge before falling back to a lower flow level. The spike seems to be followed by a slight bog in the power. Right now I have the 0.6mm jet installed and no restrictor. Threshold is about 1:00 and gain is about 12:00. Should I try a restrictor? Has anyone tried using the MAP control mode instead of IDC on their R56?
RE: Aquamist HFS-3 and MINI Tank GB - HbSean - 11-20-2011 12:24 AM
I would It helped me
RE: Aquamist HFS-3 and MINI Tank GB - Buli - 11-20-2011 09:00 AM
(11-19-2011 10:18 PM)LASRGUY Wrote: I'm noticing occasionally, especially when the engine is cold, that under mild throttle the meth spray will come on at only a few psi of boost and initially spike to full flow on the gauge before falling back to a lower flow level. The spike seems to be followed by a slight bog in the power. Right now I have the 0.6mm jet installed and no restrictor. Threshold is about 1:00 and gain is about 12:00. Should I try a restrictor? Has anyone tried using the MAP control mode instead of IDC on their R56?
I would stay out of boost until your engine is warm.
My car did what you are describing one time. It kinda freaked me out. I don't know why the IDC was high.
RE: Aquamist HFS-3 and MINI Tank GB - ColinGreene - 11-20-2011 11:11 AM
https://www.facebook.com/pages/Howerton-Engineering/
![[Image: tumblr_luwx18evwJ1qanb21o1_500.gif]](http://25.media.tumblr.com/tumblr_luwx18evwJ1qanb21o1_500.gif)
Aquamist HFS-3 and MINI Tank GB - LASRGUY - 11-20-2011 12:24 PM
The kit has 0.5, 0.7, and 0.9mm restrictors listed as 380cc/min, 680cc/min, and 1080cc/min. I measured 300cc/min at 100% flow with the 0.7mm jet and no restrictor. Seems like the 0.5mm restrictor should be fine so that's what I installed.
I did a flow test with the 0.5mm restrictor and various nozzles.
0.6mm nozzle flowed 250cc/min
0.7mm nozzle flowed 300cc/min
0.8mm nozzle flowed 350cc/min
The 0.5 mm restrictor didn't cut the flow noticeably but on a brief drive it did seem to cut down on the initial surge I mentioned. It also kept the flow reading from maxing out the scale on the gauge. I'm pleased with the change.