+- RMW Forums (http://revolutionmini.com/forum)
+-- Forum: RMW (/forumdisplay.php?fid=1)
+--- Forum: Announcements (/forumdisplay.php?fid=24)
+---- Forum: Vendor Announcements (/forumdisplay.php?fid=25)
+---- Thread: Aquamist HFS-3 and MINI Tank GB (/showthread.php?tid=237)
RE: Aquamist HFS-3 and MINI Tank GB - Andrea - 04-15-2012 02:36 PM
......
RE: Aquamist HFS-3 and MINI Tank GB - ColinGreene - 04-15-2012 06:17 PM
You need to change the solder joint on the back of the board or it wont work right.
because the duty cycle is going to be like 35 to 40 percent. at best.
If you continue to mess with those pots it will wear out. Horay.
Aquamist HFS-3 and MINI Tank GB - Andrea - 04-16-2012 05:04 AM
Sorry
RE: Aquamist HFS-3 and MINI Tank GB - Jan - 04-16-2012 08:17 AM
don't worry about IDC..........it will be controlled by the ecu
RE: Aquamist HFS-3 and MINI Tank GB - Andrea - 04-16-2012 03:36 PM
I have made the modification.. now 1.5 is working.
I have set also the meth fail safe with the vipec... all is working well swapping the maps..
RE: Aquamist HFS-3 and MINI Tank GB - silhouette88 - 05-14-2012 10:44 PM
I saw this over on the E90 forum. Thought it was interesting and worth sharing.
RE: Aquamist HFS-3 and MINI Tank GB - ColinGreene - 05-15-2012 01:34 AM
What did i win for running 100%, Do i have Hair on my chest or do i need to be pushed out at the sound of a gong.
RE: Aquamist HFS-3 and MINI Tank GB - jcw2006aus - 05-15-2012 04:24 AM
Thanks, but made me want to pee, with the background noise
RE: Aquamist HFS-3 and MINI Tank GB - BlrdFx - 05-15-2012 08:13 AM
If the same test had been done with gasoline you would have been charged by the Feds for using a flamethrower!
RE: Aquamist HFS-3 and MINI Tank GB - ChrisMCS04 - 05-15-2012 08:31 AM
Forgive my question, but is that suppose to be showing that running 50/50 meth is quite a safe thing? From the video it would seem to be...