You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Just found this ad trolling on FB....
10-26-2015, 09:19 AM
Post: #1
Just found this ad trolling on FB....
http://www.racingjunk.com/Other/18257741...per-S.html

[Image: 1398879611_3d_snake_chalk_stop_motion.gif]
Find all posts by this user
Quote this message in a reply
10-26-2015, 02:33 PM
Post: #2
RE: Just found this ad trolling on FB....
Race Prepped 2002 Mini Cooper S
Selling my well sorted race prepped MINI. This is a real head turner at the track and slithers through the track like its on rails. With a better driver this could be very competitive in NASA, SCCA & EMRA. I won the TMF Time Trial Championship with EMRA in 2013, the EMRA ST-3 Race Championship in 2014. This year, due to time constraints and energy, I haven’t done much TT or Racing. I attended a few HPDE this year. It is eligible for NASA GTS3, TTB, EMRA ST-3. The engine was built around September last year and has about 6 hours on it. I took it out two weeks ago, here is some track video. I passed every car on the track. Passed 2015 NASA Race Tech. All work on this car was done by RMW, Helix 13 and Stable Energies.

1. RMW Stepped Race Header
2. RMW Stroker Engine short block
3. RMW Billet Stroker Crank
4. Custom Rods/Piston/Sleeves
5. RMW Oil Sump Baffle, seals
6. Inconel Valves
7. RMW CAM
8. AST 5100 Coilovers
9. AST Camber Plates
10. RMW Coolant Overflow tank with catch can
11. RMW Race Axles
12. New Stock Supercharger (5 hours)
13. Front and rear swaybars
14. 6 Point Roll Cage built by Stable Energies
15. RMW Tune performed at Helix 13 (Approximately 240 hp)
16. Way and Alta end links
17. ProSport Gauges
18. Light weight OZ wheels

The following will be included with the sale of the car:
1. AIM SOLO DL attached to CAN BUS for data acquisition
2. My Laps Timer
3. GoPro Hero with roll bar mount.
4. Custom made trailer, this trailer is slightly smaller than most 16” trailers and should be able to fit in most 8’ wide garages
To build this mini would cost substantially more from scratch. It’s the most photographed car on track…who doesn’t love a mini that is a beast on the track?
It is ready to race, you can hitch this up to your truck and go straight to the track. The only thing it will need maintenance wise are new rotors. The tires still have a few heat cycles in them left. 205/40/16…why buy a bigger racecar that requires bigger tires and more money for them?

Car has clean title but is of course not street legal.

Dave
Great quote " if you are on this forum, high probability that you are already full retard for Mini's" -Jan

[Image: Jack-Nicholson.gif]
Find all posts by this user
Quote this message in a reply
10-26-2015, 02:36 PM (This post was last modified: 10-26-2015 05:58 PM by Savvy.)
Post: #3
RE: Just found this ad trolling on FB....
It's Binish's car. Funny, we were just talking about this car on Saturday, at Helix.

[Image: 1398879611_3d_snake_chalk_stop_motion.gif]
Find all posts by this user
Quote this message in a reply
10-27-2015, 08:22 AM
Post: #4
RE: Just found this ad trolling on FB....
just talked to Binish, said he changed jobs, but hoping it won't sell........lol
must be a wife thing

You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
10-27-2015, 09:37 AM
Post: #5
RE: Just found this ad trolling on FB....
"Honest, hunny.... I tried. Guess I'm stuck with it."

ROFLMAO.

[Image: 1398879611_3d_snake_chalk_stop_motion.gif]
Find all posts by this user
Quote this message in a reply
10-27-2015, 10:29 AM
Post: #6
RE: Just found this ad trolling on FB....
I'm more interested in the trailer.

The only good F56 is a dead F56
[Image: 11018065_10206797715411844_6674805954892472119_n.jpg]
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)