Huge part out of my R53
|
12-16-2011, 02:43 PM
(This post was last modified: 12-28-2011 02:07 AM by kc jr 54.)
Post: #1
|
|||
|
|||
Huge part out of my R53
PLEASE DIRECT ALL QUESTIONS TO THE EMAIL BELOW:
kcjrmini@gmail.com You can have pictures upon request, and obviously will only happen upon removal of said products. As of right now I am pretty firm on all pricing, BUT will do deals for packages. Prices do NOT include shipping, but you will only be charged actual cost via FedEX. With that, I would prefer to keep most dealings w/in the states, but if you are outside the US dont hesitate to inquire anyways. ASTs 4100 w/ 10k Hypercoil Springs $1200 -These are some of the original designed TSW "Softcore" coilovers. -Total mileage on this set at this point is roughly 45k and they still feel strong and can provide video showing good and strong damping and rebound. -Will come w/ two freshly rebuilt/never installed rear shocks as well. (4 rear shocks in total) -These come with NO springs. TSW LDM Braking kit $650 -Kit was used for 40k miles. -Comes w/ all hardware (in excellent condition) and Goodridge SS front lines. -Needs new pads. -Rotors are still in excellent condition showing barely and usage. H-Sport Rear Control arms $150 ~~ PENDING H-Sport Rear Sway 25.5 w/ Brackets and Bushings $200 Craven CAI 1st gen (old Stainless steel) $150 Jackson Racing Header (4-2-1) w/o Cat $200 Schroth Quick Fit Harness (Red) $150 Craven Strut Tower Defenders (black) $115 ~All hardware included. Kingsborne Plug wires (Red) $40 ~ 5k worth of use. Still look brand new. Facelift Harmonic Balancer $150 -Very low mileage and in brand new condition Rubber Floor Mats w/ S logo (only fronts) Newer textured $40 Ruber Floor Mats w/ MINI Logo (F&B) older thicker version $50 Craven Rear Wiper Delete (BNIB) $25 Alta Oil Catch Can $50 Ireland Engineering Lower Mount inserts $25 Ireland Engineering Tranny mount inserts $25 Factory Side Post mount cup-holder $40 Exedy Super Single $550 -Bought off of LOKI w/ a reported 5k miles of use, with the intention on installing when i did needed to. -He had it installed in a MC 6spd swapped car, so it saw very little amounts of power and torque to it. 02-04 MCS 6Speed transmission (non-LSD) $500 - Was told it had 15k miles on it out of a wrecked MINI. Does NOT have shift linkage assembly as it was damage in shipping. Everything else about the tranny is good though. Just-a-Cooper Valvetrain set $50 -All 16 valves, springs and retainers. In excellent condition, really they look brand new. Axles for a MCS 6 Speed. $300 -Bought as spares in my dream plans when power was going to be to much, but in reality never was. Boots are in perfect shape, and there is no slop in the joints. Water-pump $50 - Was attached to a S/C i bought, w/ only 30k miles. All seals still look great and tight. Pre-Facelift "Joey Modded" Xenon headlights w/ Dark Silver rings $200 PLUS your Xenon headlights -Started w/ Brand new Hella headlights, and have only been mounted on the car for roughly 5k miles. Time and mileage include the bulbs, housings, ballasts, ignitors...everything. -These headlights were taken apart the non-conventional way. They were cut open alone the edge on the housing part. If you are at all familiar with the pre-facelift xenon's you will know this is the only way to insure lenses that stay stress crack free and undistorted. Aero Kit painted Dark Silver $1000 -The front bumper of this aero kit is very special and i only know of one other person that has it done like this. The Turn indicators have been shaved, and some WMW Challenge style brake ducts have been molded into place. -Side skirts are in great shape, and will including the black mounting strip. -Rear bumper is also in great shape w/ the stickers in the lower portion still silver, and have no yellowed at all. They also have the reflectors already installed for you guys w/ clear tail-lights. -If you are even semi local to East Texas, i would be more then willing to help with the swap of this. If you have a DARK Silver car, AND local, i would much rather do dealings with you, as I no long have stock bumpers or side skirts. TRM C3m 15x9 Black $350 -No tires Konig Flatout 15x8 et25 Silver/Polished $500 -225/50-15 BFG G-Force Sport --3 have 60% life left --1 only has 4k miles on it due to a nail in the sidewall |
|||
12-16-2011, 08:37 PM
Post: #2
|
|||
|
|||
RE: Huge part out of my R53
Stuped question why the part out? What are you getting next?
4.0
|
|||
12-16-2011, 08:58 PM
Post: #3
|
|||
|
|||
RE: Huge part out of my R53
Na, not a stupid question at all. Going back to my roots I think. GM V8 RWD.
Recently spent a lot of time w/ my buddies rb26 Z32, and the MINI feels beyond pathetic now lol. |
|||
12-16-2011, 10:31 PM
Post: #4
|
|||
|
|||
RE: Huge part out of my R53
Iwantthewheels!
“Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
12-16-2011, 11:03 PM
Post: #5
|
|||
|
|||
Huge part out of my R53
Email sent on camber plates, rockers and brakes!
a whole galaxy of multi-colored uppers, downers, laughers, screamers... Also, a quart of tequila, a quart of rum, a case of beer, a pint of raw ether... Not that we needed all that for the trip... |
|||
12-18-2011, 01:13 AM
Post: #6
|
|||
|
|||
RE: Huge part out of my R53
List has been updated !
|
|||
12-28-2011, 02:07 AM
Post: #7
|
|||
|
|||
RE: Huge part out of my R53
TTT...
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)