You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Aquamist HFS-3 and MINI Tank GB
07-28-2011, 11:55 PM
Post: #61
RE: Aquamist HFS-3 and MINI Tank GB
Another WM Injection 101 question: What size injector?

Is it based on current HP and whether or not we plan to run 100% or is it based on the kind of performance gains we're looking to get, or both?

2009 MINI John Cooper Works
Find all posts by this user
Quote this message in a reply
07-29-2011, 12:16 AM
Post: #62
RE: Aquamist HFS-3 and MINI Tank GB
(07-28-2011 12:09 PM)Howerton Engineering Wrote:  Yes, on the 56 the unit will recognize the cooler IAT, as long as the jet is before the TMAP, and adjust accordingly.

It will also adjust fueling a small degree as well.

Perfect. Add me up as well please. Smile
Find all posts by this user
Quote this message in a reply
07-29-2011, 12:34 AM
Post: #63
RE: Aquamist HFS-3 and MINI Tank GB
(07-28-2011 11:55 PM)sooper_cooper Wrote:  Another WM Injection 101 question: What size injector?

Is it based on current HP and whether or not we plan to run 100% or is it based on the kind of performance gains we're looking to get, or both?

I found this page very helpful.

http://howertonengineering.com/tech-info...g-jetting/


RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3

Life is hard. But life is really hard if you're stupid.
Find all posts by this user
Quote this message in a reply
07-29-2011, 03:15 PM
Post: #64
RE: Aquamist HFS-3 and MINI Tank GB
That's perfect. Thanks for the link silhouette!

2009 MINI John Cooper Works
Find all posts by this user
Quote this message in a reply
07-30-2011, 06:37 PM
Post: #65
RE: Aquamist HFS-3 and MINI Tank GB
Sign me up.

2010 MCS - RMW Tune, JCW Stage 1 CAI, Helix FMIC, Akropovic High Flow DP, JCW Mid Pipe, JCW Stage 1 Muffler, 17x7 O.Z. Ultraleggera, JCW Sport Suspension, Aquamist hfs-3 kit
Find all posts by this user
Quote this message in a reply
07-31-2011, 10:55 AM
Post: #66
RE: Aquamist HFS-3 and MINI Tank GB
ONLY 2 MORE!!!!!!!!!!!!!!!!!!!
Find all posts by this user
Quote this message in a reply
07-31-2011, 10:57 AM
Post: #67
RE: Aquamist HFS-3 and MINI Tank GB
I'm sorry to disappoint you guys but there has been a BIG change in plans.. Financially.. Sad I'll be glad if you could take me off the list
Find all posts by this user
Quote this message in a reply
08-01-2011, 07:49 AM
Post: #68
RE: Aquamist HFS-3 and MINI Tank GB
The GB is now Closed.

We will need a PM or preferably email( to jeff@howertonengineering.com) from each person with the following information:

1) Full Name and shipping address ( and screen name for reference)
2) 53 or 56
3) Injector size, appox. HP level
4) Fluid you wish to run 50/50, 75/25, 100% etc.
5) Red or Blue gauge face.
6) Left or Right tank.

Knowing #3 above, we will supply 3 jets for a range of different fluids. #4 is more for reference, but helpful to know. If you have tuning questions, I can help in general terms, but it's best to ask Jan for detailed info.

We are expecting to have tanks ready in about 2 weeks. We need 25% down, $200, lock your spot in and confirm the order. We can send a PayPal invoice for the deposit, or setup a link on the website for you to pay be CC.

If I've missed anything or you have any questions, please email directly or call for the quickest response, and I'll update this post with more details.
Visit this user's website Find all posts by this user
Quote this message in a reply
08-01-2011, 10:16 PM (This post was last modified: 08-01-2011 10:18 PM by ThumperGP.)
Post: #69
RE: Aquamist HFS-3 and MINI Tank GB
Just thought I'd post up a little update as more of you are about to start enjoying the joy's of meth injection Big Grin

To be honest, I still haven't toyed with it as much as I would like to, car was broken for a week or so (coilpacks), and been pretty busy. I still want to move the jet location further down the inlet track, down just after the I/C. But even where it is (just after the MAP sensor) results have been outstanding. Everytime I drive the car I cannot get over at how strong it is running.

I started with the .6mm jet, running pre-mixed Boost Juice (roughly 50/50 water/meth). Quickly went up to the .7mm jet and the car seemed to like it even better. I started running 100% meth, the car seemed to respond well and AFR's stayed in-check. But I went down to 75/25 for two tanks and it seemed better. And now I'm back to my own mix of 50/50. It is very hard to quantify any of the differences without a dyno, especially when all 3 seemed to work amazingly. I will venture to say that the 50/50 and 75/25 felt better than the 100% though.

I don't think I will run 100% anymore, it doesn't seem to be worth it (results might be different with it being tuned to 100%...but I'm not tuned for meth yet). Plus the properties of water should not be overlooked. The latent heat of water is greater than that of methanol...meaning it can absorb more energy (read: heat) than methanol. This means it can do wonders in the cylinder in reducing combustion temps. This is especially true in a high compression, high boost motor. 110 degree ambient temps, running 10.5:1 compression, with around 20psi from my JCW turbo....it can be said there is a TON of heat that needs to be dealt with in there and water really shines in that situation. There's lots of chemistry/physics and you can go on for hours about the properties of methanol vs the properites of water. In my limited knowledge...all I know is that I'm keeping water in the mix!

2006 MINI Cooper S JCW GP (R53)--GP #1599
-RMW FUNstick Cam, RMW Shorty Header, RMW 450cc inj
2014 MINI Cooper (F56)--Midnight Black
Find all posts by this user
Quote this message in a reply
08-01-2011, 10:46 PM
Post: #70
RE: Aquamist HFS-3 and MINI Tank GB
Thanks for your feedback "The Other Thumper". As always, you describe things (at least for me) very clearly. I guess color-blindness does not impact eloquence. Tongue

I can't wait to hear your experience after getting tuned for meth.


RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3

Life is hard. But life is really hard if you're stupid.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 41 Guest(s)