You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Group buy on aquamist
04-24-2014, 09:25 PM
Post: #31
RE: Group buy on aquamist
i think you started it right?
Also if you buy a dual tank and need a bracket or a way to mount it let me know, i can make you one
I just finished one for amacio, he has not seen it yet but its pretty excellent.

[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
04-24-2014, 10:34 PM (This post was last modified: 04-24-2014 10:37 PM by silhouette88.)
Post: #32
RE: Group buy on aquamist
Nah, it was Erik. Here 'tis - http://revolutionmotorworks.com/forum/sh...hp?tid=401

(hahahaha Colin...thanks for the sig pic update)


RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3

Life is hard. But life is really hard if you're stupid.
Find all posts by this user
Quote this message in a reply
04-24-2014, 10:41 PM
Post: #33
RE: Group buy on aquamist
I thought you would like that.

[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
04-25-2014, 06:04 AM
Post: #34
RE: Group buy on aquamist
Colin -
I just got the dual tank from Howerton. Need to get your mounting bracket. Get one of these to Kevin please and let me know how much it is.

Craig

02R53-132k-1.8 stroker-RMW Head-C39-94 Rotrex-GrandAm Cam-Shorty Header-1000cc injectors-Aquamist-ViPec-OS Giken Clutch & LSD-JRZ RS dampers-Swift Springs-RMW BBK-130 MPH Club Bonneville 2008-132.6 MPH-360whp 247tq w/meth-348 whp 240 tq w/109 unleaded no meth-Bonneville 2012 144.1 MPH
Find all posts by this user
Quote this message in a reply
04-27-2014, 12:39 AM
Post: #35
RE: Group buy on aquamist
Is there a quick disconnect on the tank? Like if you needed to lift the pad to access the battery?

tap'd on my Moto X

06 MCS JCW PH/PH RMW BVH, Grand Am cam, ARP studs, 550cc, Sump baffle, Shorty. 16% Pulley, ATI Crank, VT mounts, Valeo clutch, FSDs, HSport Comp rear bar, Powerflex bushings, IE fixed, Konig Feathers, Michelin PSS (17s), Alcantara JCW stuff, gray dials, other stuff...
Find all posts by this user
Quote this message in a reply
04-27-2014, 11:01 AM
Post: #36
Group buy on aquamist
(04-27-2014 12:39 AM)NickG Wrote:  Is there a quick disconnect on the tank? Like if you needed to lift the pad to access the battery?

tap'd on my Moto X

Mine is bolted in so I don't believe there is.
Find all posts by this user
Quote this message in a reply
04-27-2014, 11:48 AM
Post: #37
RE: Group buy on aquamist
Colin, does your braket fit the R56 or can you make one?

2011 fJCW
Find all posts by this user
Quote this message in a reply
04-27-2014, 01:44 PM
Post: #38
RE: Group buy on aquamist
yeah i can probably make you one also. the boot area is very similar.

[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
04-27-2014, 02:36 PM
Post: #39
Re: RE: Group buy on aquamist
(04-27-2014 11:01 AM)90intherain Wrote:  
(04-27-2014 12:39 AM)NickG Wrote:  Is there a quick disconnect on the tank? Like if you needed to lift the pad to access the battery?

tap'd on my Moto X

Mine is bolted in so I don't believe there is.

So do you leave enough slack on the lines to move it aside or would you need to siphon the tank then undo the fittings to get to the battery?

tap'd on my Moto X

06 MCS JCW PH/PH RMW BVH, Grand Am cam, ARP studs, 550cc, Sump baffle, Shorty. 16% Pulley, ATI Crank, VT mounts, Valeo clutch, FSDs, HSport Comp rear bar, Powerflex bushings, IE fixed, Konig Feathers, Michelin PSS (17s), Alcantara JCW stuff, gray dials, other stuff...
Find all posts by this user
Quote this message in a reply
04-27-2014, 06:27 PM
Post: #40
Group buy on aquamist
(04-27-2014 02:36 PM)NickG Wrote:  
(04-27-2014 11:01 AM)90intherain Wrote:  
(04-27-2014 12:39 AM)NickG Wrote:  Is there a quick disconnect on the tank? Like if you needed to lift the pad to access the battery?

tap'd on my Moto X

Mine is bolted in so I don't believe there is.

So do you leave enough slack on the lines to move it aside or would you need to siphon the tank then undo the fittings to get to the battery?

tap'd on my Moto X

That is correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 5 Guest(s)