You are not logged in or registered. Please login or register to use the full functionality of this board...

Thread Closed 
ATI plus 2% R53
05-14-2015, 01:00 PM (This post was last modified: 06-03-2015 04:34 AM by 1qwkmini.)
Post: #1
ATI plus 2% R53
Used less than 10 hrs.

Too much boost/IAT at 8k rpm

Perfect for street or stock redline.

SOLD
Find all posts by this user
06-02-2015, 07:24 PM
Post: #2
RE: ATI plus 2% R53
Too much boost? Please explain, was thinking of getting either the 2% or the stock one that really is just under a 1%.
Find all posts by this user
06-03-2015, 02:47 AM
Post: #3
RE: ATI plus 2% R53
The factory ECU starts complaining when you go over 20 lbs. boost. Depending on your pulley combination, you can go over this number. I only have a 15% underdrive on my supercharger, but my boost gauge has indicated a peak of 1.2 bar, or roughly 17.40 lbs. boost, at top end. This will increase as you go to a 17% or 19% supercharger underdrive pulley, 1% or 2% crank overdrive pulley, etc. Your total boost will also vary based on altitude.

[Image: signature7.jpg]
Find all posts by this user
06-03-2015, 09:56 AM
Post: #4
ATI plus 2% R53
Its the factory MAP sensors in combination with the ECU. The sensors only read to 21psi.


Sent from my iPhone using Tapatalk

[Image: p.jpg]

[Image: tumblr_m74uwfGtb61r59rd9o1_500.jpg]


Easily agitated, Half way retarded, and mentally unstable... Cant put up with it? SUCK MY RICHARD!!
Find all posts by this user
06-04-2015, 02:22 AM
Post: #5
RE: ATI plus 2% R53
^^^^^^

[Image: signature7.jpg]
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)