|
PS Cooling Setup for Automatic S
|
|
01-25-2016, 04:18 AM
Post: #1
|
|||
|
|||
|
PS Cooling Setup for Automatic S
My PS fan is in dire need of replacement. In addition to replacing it, I would like to install the snorkel/duct setup used on the Automatic S 1st-Gens. Does anyone have the cooling duct and underbody paneling used? Thanks.
Parts 2 and 3 in the diagram: http://www.realoem.com/bmw/images/diag_34np.png Cooling duct - 51 75 7 201 453 Underbody paneling - 51 75 7 201 784 ![[Image: signature7.jpg]](http://www.cybertekit.net/mini/signature7.jpg) |
|||
|
|
01-25-2016, 10:37 PM
Post: #2
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
A how to exists if you google it, i personally dont see the point.
![[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]](http://24.media.tumblr.com/tumblr_m1rdjx4Vwg1qzkikho1_250.gif) “Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
|
|
|
01-26-2016, 01:34 AM
(This post was last modified: 01-26-2016 01:35 AM by JumpingJackFlash.)
Post: #3
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
The PS cooling fan on my '06 MCS has been grinding with dust/dirt for years. It makes a bit of a squeak sound at times. I want to replace the fan but also do some preventive maintenance since the Germans put down tons of road salt/grime during the Winter months. I have one of the original skid plates from my old '02 MCS back in the states, but I don't want to have to remove it every time I do an oil change. Not to mention it could become a place for fluid drips to collect, and German car inspectors are extremely picky about zero oil leaks (which is why I made it a priority to replace the crank, oil filter housing, and oil exchanger seals a couple of months ago).
|
|||
|
|
|
01-26-2016, 11:23 AM
Post: #4
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
Groundhog destroyed the duct on my car. I replaced with the non-ducted setup, and put a grille on the fan. Has been fine ever since. But I consider replacing those fans a PM item every few years...
![[Image: HPLCuz.gif]](http://cdn.makeagif.com/media/8-18-2014/HPLCuz.gif) |
|||
|
|
01-28-2016, 05:13 PM
Post: #5
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
there is a recall on all r53 for the ps might be able to get it covered.
|
|||
|
|
|
01-28-2016, 11:21 PM
Post: #6
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
“Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
|
|
|
01-29-2016, 04:06 AM
(This post was last modified: 01-29-2016 04:10 AM by JumpingJackFlash.)
Post: #7
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
^^^^ That's the link that got me turned on to the idea. So far, I've found the cooling duct for ~$157. Just wanted to see if I could find one used since that price went way up compared to ~$35 when they were still available during OEM production. Shroud is still cheap. Replacement fan is still ~$60 too.
|
|||
|
|
|
03-19-2016, 06:30 AM
Post: #8
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
Thanks Colin for hooking me up with the PS fan duct. I will work on acquiring the remaining parts to get this project finished.
|
|||
|
|
|
03-19-2016, 11:12 AM
Post: #9
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
No problem.
Did it make it over ok? “Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
|
|
|
03-19-2016, 12:01 PM
Post: #10
|
|||
|
|||
|
RE: PS Cooling Setup for Automatic S
Yes, the package arrived just fine. It hit Chicago on Wednesday the 16th. I was surprised it was here today. Usually takes a little longer to make the flight (based on package size, first-come first fit).
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)