You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Aquamist HFS-3 and MINI Tank GB
09-11-2011, 05:00 PM
Post: #311
RE: Aquamist HFS-3 and MINI Tank GB
(09-11-2011 04:53 PM)HbSean Wrote:  Lol, yes I meant the control box.. I seem to remember someone doing it just can't find that post.

LOL, sorry i killed my post as I thought you meant the gauge. Here's the guy who did it on NAM. http://www.northamericanmotoring.com/for...s-3-a.html


RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3

Life is hard. But life is really hard if you're stupid.
Find all posts by this user
Quote this message in a reply
09-11-2011, 05:26 PM
Post: #312
RE: Aquamist HFS-3 and MINI Tank GB
Lol thanks I thought I was seeing things..
Find all posts by this user
Quote this message in a reply
09-11-2011, 05:27 PM
Post: #313
RE: Aquamist HFS-3 and MINI Tank GB
Maybe it's that growth on your forehead. Big Grin Big Grin


RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3

Life is hard. But life is really hard if you're stupid.
Find all posts by this user
Quote this message in a reply
09-11-2011, 06:27 PM
Post: #314
RE: Aquamist HFS-3 and MINI Tank GB
LOL, Yeah I gotta go to the doc to get that checked out.. Tongue
Find all posts by this user
Quote this message in a reply
09-11-2011, 06:29 PM
Post: #315
RE: Aquamist HFS-3 and MINI Tank GB
(09-11-2011 06:27 PM)HbSean Wrote:  LOL, Yeah I gotta go to the doc to get that checked out.. Tongue

I hear the have a pill to make it bigger if you want.

2010 MCS - RMW Tune, JCW Stage 1 CAI, Helix FMIC, Akropovic High Flow DP, JCW Mid Pipe, JCW Stage 1 Muffler, 17x7 O.Z. Ultraleggera, JCW Sport Suspension, Aquamist hfs-3 kit
Find all posts by this user
Quote this message in a reply
09-12-2011, 09:29 AM
Post: #316
RE: Aquamist HFS-3 and MINI Tank GB
update: I have the kit spraying on to the windshield. Working with Jeff, getting flows up to where the should be. I installed the boost cut option and am learning how to set it up.

2010 MCS - RMW Tune, JCW Stage 1 CAI, Helix FMIC, Akropovic High Flow DP, JCW Mid Pipe, JCW Stage 1 Muffler, 17x7 O.Z. Ultraleggera, JCW Sport Suspension, Aquamist hfs-3 kit
Find all posts by this user
Quote this message in a reply
09-12-2011, 07:39 PM
Post: #317
RE: Aquamist HFS-3 and MINI Tank GB
(09-12-2011 09:29 AM)Buli Wrote:  update: I have the kit spraying on to the windshield. Working with Jeff, getting flows up to where the should be. I installed the boost cut option and am learning how to set it up.

done yet??

2006 MINI Cooper S JCW GP (R53)--GP #1599
-RMW FUNstick Cam, RMW Shorty Header, RMW 450cc inj
2014 MINI Cooper (F56)--Midnight Black
Find all posts by this user
Quote this message in a reply
09-12-2011, 08:06 PM
Post: #318
RE: Aquamist HFS-3 and MINI Tank GB
(09-12-2011 07:39 PM)ThumperMCS Wrote:  
(09-12-2011 09:29 AM)Buli Wrote:  update: I have the kit spraying on to the windshield. Working with Jeff, getting flows up to where the should be. I installed the boost cut option and am learning how to set it up.

done yet??

All seems good. Went through more then half a tank of 100% methanol tonight. IDC default setting, gain full CW, 0.8 jet. Pulls good. Haven't finished the boot yet or the controller mounting. I had a rattle snake noise in the back. I stopped and took my socks off and put them around the wire loom. Quiet now. I ran it very hard for 30 minutes then shut it off, the cooling fan only ran for about four seconds. Jeff was very helpful.
Need a dyno tune now.

Hey Jan what is is closest you get to Kansas City?Big Grin

2010 MCS - RMW Tune, JCW Stage 1 CAI, Helix FMIC, Akropovic High Flow DP, JCW Mid Pipe, JCW Stage 1 Muffler, 17x7 O.Z. Ultraleggera, JCW Sport Suspension, Aquamist hfs-3 kit
Find all posts by this user
Quote this message in a reply
09-12-2011, 08:15 PM
Post: #319
RE: Aquamist HFS-3 and MINI Tank GB
Any special reason you have the gain up that high?

(09-12-2011 08:06 PM)Buli Wrote:  
(09-12-2011 07:39 PM)ThumperMCS Wrote:  
(09-12-2011 09:29 AM)Buli Wrote:  update: I have the kit spraying on to the windshield. Working with Jeff, getting flows up to where the should be. I installed the boost cut option and am learning how to set it up.

done yet??

All seems good. Went through more then half a tank of 100% methanol tonight. IDC default setting, gain full CW, 0.8 jet. Pulls good. Haven't finished the boot yet or the controller mounting. I had a rattle snake noise in the back. I stopped and took my socks off and put them around the wire loom. Quiet now. I ran it very hard for 30 minutes then shut it off, the cooling fan only ran for about four seconds. Jeff was very helpful.
Need a dyno tune now.

Hey Jan what is is closest you get to Kansas City?Big Grin
Find all posts by this user
Quote this message in a reply
09-12-2011, 08:21 PM
Post: #320
RE: Aquamist HFS-3 and MINI Tank GB
I was just in Nebraska for my parents 65th wedding anniversary!

You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 33 Guest(s)