Aquamist HFS-3 and MINI Tank GB

[LASRGUY]

The kit has 0.5, 0.7, and 0.9mm restrictors listed as 380cc/min, 680cc/min, and 1080cc/min. I measured 300cc/min at 100% flow with the 0.7mm jet and no restrictor. Seems like the 0.5mm restrictor should be fine so that's what I installed.

I did a flow test with the 0.5mm restrictor and various nozzles.
0.6mm nozzle flowed 250cc/min
0.7mm nozzle flowed 300cc/min
0.8mm nozzle flowed 350cc/min

The 0.5 mm restrictor didn't cut the flow noticeably but on a brief drive it did seem to cut down on the initial surge I mentioned. It also kept the flow reading from maxing out the scale on the gauge. I'm pleased with the change.