Aquamist HFS-3 and MINI Tank GB
|
02-17-2012, 03:17 PM
Post: #850
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
OK so this morning before I left for work I decided to play around with the threshold and gain a little. The kit has been trouble free ever since it was installed but I figured I'd never know if it could be even better if I don't try. So I tweaked the threshold down a bit, and the gain a little up. I've been running 100% meth through the 0.8 mm jet for a couple months and loving it, and I still have the largest (0.9 mm?) restrictor installed.
I took it easy, as always, for the first 10 minutes of driving. Once things were a bit warmer I started testing out pedal position and seeing when it would start injecting. The first time it injected I immediately sensed a difference. Whereas before I would feel the instant I was on boost (like an abrupt change in power), now at the point where power "comes on" it's super smooth. I tried several times just to make sure I wasn't imagining things but felt the same smooth transition effect. I haven't tried a nice long WOT pull in a higher gear yet (my commute barely allows me to reach 45 MPH usually) but I wanted to share this finding and see if anyone else had a similar experience. RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3 Life is hard. But life is really hard if you're stupid. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 4 Guest(s)