TVS900 Basics

[dansskk]

(07-05-2013 11:02 PM)Canyon Factory Wrote:  Mine will probably never be able to see 20psi. With the 13~14psi they are seeing now, due to my altitude, I would only have around 9~10, then you need to figure the pressure drop of going to a front mount I/C on top of that.

Either way, it will be way better than the Shitex I wasted a couple grand on, have better performance than stock, and have the low end I am after.

Cant wait to see how far they will push this S/C with different pulley's!

Hey Dan, are you using the stock JCW intake box? Wonder how loud it would be with a setup like mine vented straight through the hood with an open filter?


From my iPhone using Tapatalk

Dick,
The car in the video has a JCW intake but the forward tube is removed and the vacuum flapper is also removed . The exhaust is also stock JCW but the RMW headers and Cat wake it up and let it blow out the resonator.
The video pulls posted today were at an elevation of 4,000 ft. plus in a high canyon but I did not have a working boost gauge to watch. It still pulled hard up at higher RPM..........