Aquamist HFS-3 and MINI Tank GB

[ThumperGP]

(09-16-2011 01:03 PM)LASRGUY Wrote:  I do have the failsafe hooked up. Looks like maybe I need to adjust some settings DIY the fault levels.

Yep!

Are you seeing the proper flow on the gauge? I had an issue where it would come up to say 3-4 bars, and then go down to 0. I was certain it was flowing just fine based on my testing with it spraying on the windshield while driving around. Turns out though, the jet was faulty.

---

(09-16-2011 01:07 PM)Buli Wrote:  One thing you could due for now is to set the Low Flow trip full CCW and the High Flow trip to full CW. Just leave them there until you have every thing else adj. and settled down.

Exactly where mine are set.