Aquamist HFS-3 and MINI Tank GB

[Howerton Engineering]

(10-01-2011 07:37 AM)etalj Wrote:  My kit's in, seems to be functioning well, with only one thing that I wasn't sure about. The green IDC light that flashes with injector pulse while testing the controller board functionality flashed slower as I depressed the throttle pedal

I wouldn't worry too much about the LED itself. One test you can do. On the control board there are some test points. If you take a meter and test ground to pin 16, check the voltage there. At idle it should be about .1-.2v roughly, and increase with revs. If the system is coming on and injecting then the signal must be increasing correctly. Are you triggering on MPS or IDC?