|
RMW 30-94 Rotrex kit (front mount)
|
|
05-31-2011, 08:07 PM
Post: #11
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
(05-31-2011 07:54 PM)ColinGreene Wrote: We could also probably do a front mount for the smaller blower correct? that is if the customer was willing to forgo air conditoning correct it is easily done You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... ![[Image: 76V0TaO.png?1]](http://i.imgur.com/76V0TaO.png?1) |
|||
|
|
06-03-2011, 07:57 AM
Post: #12
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
ok, ordered some parts yesterday to test, will take some more fabrication to get it in there but I believe this in the long run will be best for track use in very hot conditions. As most of you know that have studied our cars , the engine bay is very tight and it's very hard for heat to get out. When you start making BIG hp, you will notice water temps climbing slowly over the laps. Having done actual testing of cars at the track in adverse conditions it's always our job to make sure we can keep the car cool enough to prevent long term engine wear.
While most of the competitors NEVER test this, WE DO! When people buy our kits I expect them to track their cars and have fun! No one said any of this is cheap or FUN! to do but it has to be done. Look no further than track days when cars don't even finish the day, let alone drive to and from the track. I'll keep everyone updated as the next REVOLUTION happens. You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
06-06-2011, 09:41 PM
Post: #13
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
Ok, dropped the car off at the fab shop today
Time to get some more of the little things done for next months Ultimate track car challenge Heat management is the issue of the day, we are expecting 100deg F temps and with that humidity it will be a real test on the cars systems. Glad we will be running a supercharger that is much cooler to start with. Keep checking back as I will update with pics as we go You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
06-06-2011, 11:39 PM
Post: #14
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
Jan -
Have you ever run any Evans NPG+ ? Craig 02R53-132k-1.8 stroker-RMW Head-C39-94 Rotrex-GrandAm Cam-Shorty Header-1000cc injectors-Aquamist-ViPec-OS Giken Clutch & LSD-JRZ RS dampers-Swift Springs-RMW BBK-130 MPH Club Bonneville 2008-132.6 MPH-360whp 247tq w/meth-348 whp 240 tq w/109 unleaded no meth-Bonneville 2012 144.1 MPH |
|||
|
|
|
06-07-2011, 06:31 AM
Post: #15
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
(06-06-2011 11:39 PM)CFMINI Wrote: Jan - No, but will get some to test 
You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
06-07-2011, 08:02 PM
Post: #16
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
Ok, after a day of getting more parts for the BIG kit, I come back to find this.........
 ![[Image: conehead.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/conehead.jpg) so onto more important things: it doesn't look like much now but watch what becomes of this.............a simple piece of cardboard ![[Image: cardboard.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/cardboard.jpg) it's nice to have quality group of guys around You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
06-07-2011, 10:12 PM
Post: #17
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
He is a goofy young man
 Longboard |
|||
|
|
|
06-08-2011, 05:23 AM
Post: #18
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
Is that a Azz Hat? Lol
![[Image: aiB8nAt.png?1]](http://i.imgur.com/aiB8nAt.png?1) |
|||
|
|
|
06-08-2011, 07:17 AM
Post: #19
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
but he's having FUN!! atleast....
Putting your phone away & paying attention to those talking to you? There's an App for that. It's called "RESPECT." |
|||
|
|
|
06-14-2011, 11:46 AM
Post: #20
|
|||
|
|||
|
RE: RMW 30-94 Rotrex kit (front mount)
Its testing i don't know what your all talking about.
![[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]](http://24.media.tumblr.com/tumblr_m1rdjx4Vwg1qzkikho1_250.gif) “Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)