You are not logged in or registered. Please login or register to use the full functionality of this board...
RMW Forums › ROTREX Superchargers › Rotrex kits
C38...........is it possible?

Post Reply 
C38...........is it possible?
04-09-2012, 10:44 AM
Post: #61
ColinGreene Offline
Memory Challenged
*******
 		Posts: 8,833
Joined: May 2011
Reputation: 12
RE: C38...........is it possible?
a decent 3 axis new is around 100k. craig would know better but i would think 100 or better.
[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
04-13-2012, 04:42 AM
Post: #62
minimark Offline
Southern Comfort
*****
 		Posts: 4,205
Joined: May 2011
Reputation: 0
Re: C38...........is it possible?
Probably could about walk from one to another in Mooresville....Wink
[Image: aiB8nAt.png?1]
Find all posts by this user
Quote this message in a reply
04-20-2012, 09:51 PM
Post: #63
jcw2006aus Offline
Member from OZ
****
 		Posts: 562
Joined: May 2011
Reputation: 0
RE: C38...........is it possible?
Jan/Colin,

what sort of fuel pressure will there be with the 1000cc injectors and booster pump? Is it worth monitioring the pressure?

Cheers,

Mark
[Image: 9aM90.jpg]

Supporting RMW from 15015kms away..........Wink
Find all posts by this user
Quote this message in a reply
04-20-2012, 10:09 PM
Post: #64
Jan Offline
Holder of the Ban Stick
*******
 		Posts: 7,360
Joined: May 2011
Reputation: 7
RE: C38...........is it possible?
(04-20-2012 09:51 PM)jcw2006aus Wrote:  Jan/Colin,

what sort of fuel pressure will there be with the 1000cc injectors and booster pump? Is it worth monitioring the pressure?

Cheers,

Mark

you shouldn't have a problem. I have a return system on mine but once I test it , it will be obvious for sure
You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
05-17-2012, 07:22 PM (This post was last modified: 05-17-2012 07:23 PM by ColinGreene.)
Post: #65
ColinGreene Offline
Memory Challenged
*******
 		Posts: 8,833
Joined: May 2011
Reputation: 12
RE: C38...........is it possible?
[Image: 2012-05-16_11-53-07_771.jpg]

[Image: 2012-05-16_11-52-45_13.jpg]
[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
05-17-2012, 07:34 PM
Post: #66
astrochex Offline
Posting Freak
*****
 		Posts: 1,668
Joined: Jul 2011
Reputation: 2
RE: C38...........is it possible?
^ is there any clearance between the runner and the C38?
*Placeholder* for an X-1 Pic
Find all posts by this user
Quote this message in a reply
05-17-2012, 08:13 PM
Post: #67
Shanne Offline
Eva Bomber
*****
 		Posts: 2,906
Joined: May 2011
Reputation: 3
RE: C38...........is it possible?
Jan, with any of the rotrex's have you seen lots of vacuum when you close the throttle body, being that its preintake. The reason I ask, is I know if you put the throttle body in front of a turbo it helps with spool and all that because it creates a vacuum in the system and in a vacuum there is no resistance, so the wheels spin MUCH easier.....I think it would be different though because its coupled to a belt on the motor....just wondering.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-17-2012, 09:17 PM
Post: #68
Jan Offline
Holder of the Ban Stick
*******
 		Posts: 7,360
Joined: May 2011
Reputation: 7
RE: C38...........is it possible?
(05-17-2012 07:34 PM)astrochex Wrote:  ^ is there any clearance between the runner and the C38?

yes


(05-17-2012 08:13 PM)Shanne Wrote:  Jan, with any of the rotrex's have you seen lots of vacuum when you close the throttle body, being that its preintake. The reason I ask, is I know if you put the throttle body in front of a turbo it helps with spool and all that because it creates a vacuum in the system and in a vacuum there is no resistance, so the wheels spin MUCH easier.....I think it would be different though because its coupled to a belt on the motor....just wondering.

it's driven by the belt, it doesn't matter as the shaft only spins by pulley speed
You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
05-17-2012, 09:28 PM
Post: #69
Shanne Offline
Eva Bomber
*****
 		Posts: 2,906
Joined: May 2011
Reputation: 3
RE: C38...........is it possible?
(05-17-2012 09:17 PM)Jan Wrote:  
(05-17-2012 07:34 PM)astrochex Wrote:  ^ is there any clearance between the runner and the C38?

yes


(05-17-2012 08:13 PM)Shanne Wrote:  Jan, with any of the rotrex's have you seen lots of vacuum when you close the throttle body, being that its preintake. The reason I ask, is I know if you put the throttle body in front of a turbo it helps with spool and all that because it creates a vacuum in the system and in a vacuum there is no resistance, so the wheels spin MUCH easier.....I think it would be different though because its coupled to a belt on the motor....just wondering.

it's driven by the belt, it doesn't matter as the shaft only spins by pulley speed

Its what I figured. Just though I would ask.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-18-2012, 10:50 AM
Post: #70
michael bradley Offline
Member
***
 		Posts: 181
Joined: Aug 2011
Reputation: 0
RE: C38...........is it possible?
Jan, just curious who did you get to do the CNC work?
[Image: 82Mq9e4.jpg?1]

06 MCS,RMW head, RMW street header, 450 injectors, RMW race cam,
RMW forged pistons, RMW forged rods, RMW oil baffel, 15% pulley, K&N cold air intake, M45, Jan tuned. 273 Whp 208 tq Big Grin
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 9 Guest(s)