You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
TVS900 Basics
08-17-2012, 09:21 AM
Post: #111
RE: TVS900 Basics
And the answer is... Roots. Because the area under the torque curve is much larger. The rotrex only has a very small chance, and this if it manages to stay all the time close to red line. You can use the power smart in a roots, a gear up than the rotrex and it still has better acceleration.
Also the Rotrex has to be in high rpm all the time, and the Tritec engine isnt really made for this type of use, not matter if some of us are reving it a lot. Watch your oil pressure gauge after 6.5k rpm.

[Image: Forever_N_A_Whit_4f31752cdff1b.jpg]
Find all posts by this user
Quote this message in a reply
08-17-2012, 09:22 AM
Post: #112
RE: TVS900 Basics
just doesn't get it^^^^^

I can't believe people are this fucking dense

You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
08-17-2012, 09:27 AM
Post: #113
RE: TVS900 Basics
I clearly said acceleration Jan. Don't always answer the same way, track, records, etc. Apart from this, you posted while i was writing. The variables are too many in the track to compare a session with another one. Acceleration, what is faster, a Roots or a Rotrex?

[Image: Forever_N_A_Whit_4f31752cdff1b.jpg]
Find all posts by this user
Quote this message in a reply
08-17-2012, 09:29 AM
Post: #114
RE: TVS900 Basics
The only reason Jan's power curve looks how it does is because he use's the big Rotrex. If he used the small rotrex it would look a lot different.

Its like a turbo. If you you put a HUGE turbo on a small displacement I4 it has nothing down low but it will rip your ass in the high RPM's. Put a roots on a EVO and a 35R on a EVO and find out what one is faster around the track.

Just because the tq is flat and instant doesnt mean its faster.....240lbs of flat tq is still 240lbs of flat tq. 350lbs of tq even higher in the rpm range is still 350lbs of tq. Its going to be faster.
Visit this user's website Find all posts by this user
Quote this message in a reply
08-17-2012, 09:29 AM
Post: #115
RE: TVS900 Basics
(08-17-2012 09:27 AM)Nickbmw Wrote:  I clearly said acceleration Jan. Don't always answer the same way, track, records, etc. Apart from this, you posted while i was writing. The variables are too many in the track to compare a session with another one. Acceleration, what is faster, a Roots or a Rotrex?

talk to me...............now tell me your TVS will accelerate faster..........

[Image: delta.jpg]

You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
08-17-2012, 09:30 AM
Post: #116
RE: TVS900 Basics
(08-17-2012 09:29 AM)Shanne Wrote:  Just because the tq is flat and instant doesnt mean its faster.....240lbs of flat tq is still 240lbs of flat tq. 350lbs of tq even higher in the rpm range is still 350lbs of tq. Its going to be faster.

EVERY...........SANE person knows this.............Rolleyes

You should never underestimate the predictability of stupidity

"Tuning Matters"

minimark Wrote:
....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid.....

[Image: 76V0TaO.png?1]
Visit this user's website Find all posts by this user
Quote this message in a reply
08-17-2012, 09:33 AM (This post was last modified: 08-17-2012 09:37 AM by Shanne.)
Post: #117
RE: TVS900 Basics
acceleration will fall off in the high rpms, this is when the rotrex or the turbo lives.

Roots are awesome at making tq. We all know this, but they dont build any tq. They stay at pretty much the same tq the whole time. This leaves you with instant acceleration that will fall off, and falls of faster then you think.

HP is how hard you hit the wall, Torque is how much of the wall you take with you.
Also remember that 240lbs of instant tq downlow also means tire spin, this mean you are wasting energy.....

The Rotrex makes it a little later in the RPM this helps keep the tires from spinning.
Visit this user's website Find all posts by this user
Quote this message in a reply
08-17-2012, 11:57 AM
Post: #118
RE: TVS900 Basics
Ok, Rotrex is better, i give up Smile This is why so many car manufacturers are using them in sport cars engines..

[Image: Forever_N_A_Whit_4f31752cdff1b.jpg]
Find all posts by this user
Quote this message in a reply
08-17-2012, 12:56 PM
Post: #119
RE: TVS900 Basics
In a race car I would take high RPM HP and TQ, in a street car Low end tq with decent legs on HP.... Torque kills things I would not go to a 25hour endurance race banking on torque as my competitive advantage... just saying. Cant wait to here more on the TVS Jan!

[Image: bale1.gif]

a whole galaxy of multi-colored uppers, downers, laughers, screamers... Also, a quart of tequila, a quart of rum, a case of beer, a pint of raw ether... Not that we needed all that for the trip...
Visit this user's website Find all posts by this user
Quote this message in a reply
08-17-2012, 06:07 PM
Post: #120
RE: TVS900 Basics
They are not using them in a oem vehicle because they dont have the ability to produce them in great enough quantity at the quality that they desire.
and they dont have the budget to market to a oem.
If they did its likely you would have herd of them before Longboards car....
the rotrex will be faster. you are at higher rpm all the time when accelerating.
also the tvs could mean wheel spin. but thats meh with a good ecu.

[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)