RMW Widebody Group Buy Pricing!
|
08-19-2015, 09:27 PM
Post: #1
|
|||
|
|||
RMW Widebody Group Buy Pricing!
RMW Widebody kit Group buy pricing:
1-4 kits $1800 + shipping 5-9 kits $1600 + Shipping 10+ kits $1500 + Shipping Leave your name on here , shipping dimensions/weight will be provided and we can get you shipping quotes directly to you. Depending on how many kits are sold will depend on delivery times. The US dollar is very strong currently vs AUS $ so nows a great time for a bargain! 50% down and NON-REFUNDABLE . The remaining due at completion You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
08-19-2015, 09:42 PM
(This post was last modified: 08-19-2015 09:42 PM by cct1.)
Post: #2
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
I'll take the spare, as long as it fits the GP bumper if you can install it great, if not I'll do it here. Kit has its own splitter correct? Hate to lose yours, it's been such an improvement, but I'll sell it if I have to.
Bedtime now, I have to go sleep before you post up some more cool shit. The only good F56 is a dead F56
|
|||
08-20-2015, 05:43 AM
Post: #3
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
What is the wheel setup (offset etc) for the kit...assume 15x9? Spacers required?
I don't think 17" will work since they already rub on the rear bodywork/metal...will there be room to trim the quarter? How much more HP will I need to overcome the added aero drag??? :} |
|||
08-20-2015, 07:05 AM
(This post was last modified: 08-20-2015 07:08 AM by cct1.)
Post: #4
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
You can fit wide 17's in there...
It's getting rid of drag--if you've seen 15x9s with spacers and how far they stick out, it makes sense what this is going to do, especially how the splitter goes out to th lower part of the arch and the air can flow smoothly over the top of the wheel instead of hitting it directly at a right angle. The car should have less drag, not more, and the drag it now has will be translated into downforce rather than wind sail and lift. If you switch to 15x9, and add the kit, from a handling standpoint, with the splitter and smooth airflow past the sides of the car, the car is going to stick at high speeds like night and day. Only thing you need to add is under panels to smooth out underneath, with those side skirts this is really going to be fun... Just putting Jan's splitter on made a HUGE difference, this is why I'm salivating so much... The only good F56 is a dead F56
|
|||
08-20-2015, 07:26 AM
Post: #5
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
Don't think 17' will fit since I already needed to trim the rear quarters to have them fit without rubbing (and the tires just barely fit in the wheel wheel) on compression of the rear suspension (the car is lowered)..suspect even more trimming will be needed, even with 15" (2" smaller diameter tire) 225/15 23"dia vs225/17 25" dia...but 1" extra clearance to the quarter may be enough.
Guess you missed the evil grin regarding the HP thing....although the frontal area will increase slightly and reduce top speed on the long straights...so again..more HP WILL BE NEEDED...any excuse!!! |
|||
08-20-2015, 07:34 AM
Post: #6
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
I feel like it's one of those things you buy when going full retard.
“Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
08-20-2015, 07:41 AM
Post: #7
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
It's already full mental..dedicated track car with full cage..just need to fix all the bad choices along the way and do it RMW!!!
|
|||
08-20-2015, 07:43 AM
Post: #8
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
Big question for me is, when would it all be complete? Perfectly fine with the 50% down, just going back to school soon so I won't have as much $$ flow. Need to plan accordingly
|
|||
08-20-2015, 08:21 AM
Post: #9
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
the sooner you order the faster you get it. Already have 3 on board. By the time you get yours we will know how many total. Should take about 3 weeks to get yours done as the other 2 were ordered long time ago. So send half the $1800 for now and when it's time to ship I will deduct from that to cover shipping
You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
08-20-2015, 08:25 AM
Post: #10
|
|||
|
|||
RE: RMW Widebody Group Buy Pricing!
(08-20-2015 07:26 AM)1qwkmini Wrote: Don't think 17' will fit since I already needed to trim the rear quarters to have them fit without rubbing (and the tires just barely fit in the wheel wheel) on compression of the rear suspension (the car is lowered)..suspect even more trimming will be needed, even with 15" (2" smaller diameter tire) 225/15 23"dia vs225/17 25" dia...but 1" extra clearance to the quarter may be enough. it's possible you have your suspension too low we found with the Rolex Cayman, that even though it was 8mph down in the straights at Daytona that the aero on the infield had the car 1.8sec faster than the higher speed 911 with same hp. (08-20-2015 07:34 AM)ColinGreene Wrote: I feel like it's one of those things you buy when going full retard. if you are on this forum, high probability that you are already full retard for Mini's.. You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 5 Guest(s)