RMW 30-94 Rotrex kit (front mount)
|
05-29-2011, 09:49 AM
(This post was last modified: 05-29-2011 07:23 PM by Jan.)
Post: #1
|
|||
|
|||
RMW 30-94 Rotrex kit (front mount)
Rotrex superchargers are the latest in forced induction systems offering high efficiency, compactness, reliability and silent operation. The C range consists of the C15, C30 and C38 families.
With the unique combination of compactness and efficiency, the Rotrex supercharger leads the way in drivable, high performance supercharged applications. Where the efficiencies of the Roots- and screw-type superchargers trail off at higher pressure ratios, Rotrex continues to provide the best thermodynamic efficiency under extreme conditions. This has been demonstrated on a number of high performance applications, such as the Twin-charged Koenigsegg CCX and Koenigsegg CCXR. Compared to traditional centrifugal superchargers, the Rotrex unit offers superior boost at lower engine speeds due to its inherent capability to accommodate high speed impeller designs. This virtue is essential for compact applications requiring more torque at low engine speeds than is usually achievable with centrifugal superchargers. The Rotrex supercharger is standard on the Ginetta (Farbio) GTS350 and the Ginetta F400, the Caterham-Lola SP/300.R , Caterham X330 and the Caterham V8 Levante as well as the Castagna Aznom and the MELKUS RS2000. Key to the Rotrex supercharger's unique compactness, efficiency, low noise and reliability is its state of the art traction drive technology. Great speeds and low noise are just some of the advantages of traction drives over traditional gear transmissions. Traction drives transmit power through friction forces between its rolling elements. The Rotrex patented traction drive uses an elastic annulus with a small pre-span to secure contact between the roller planets and the sun shaft with a reasonable force. The patented "ramp effect" increases efficiency and reliability in the transmission by regulating the torque transfer capability on demand through self-adjusting planet geometry. To enhance performance, the Rotrex traction drive uses a special traction fluid. These fluids are a new family of synthetic hydrocarbon oils and greases offering a series of unique performance advantages. Developed specially for its use in Rotrex superchargers, the SX100 momentarily increases viscosity under high surface pressure, enhancing the traction drive performance by securing the optimum friction between rolling elements while cooling and protecting the system. This traction drive combined with the latest technology in centrifugal compression, characterized by high adiabatic efficiency and low noise, gives Rotrex superchargers an exceptional competitive edge over any other forced induction solution. At the heart of this kit lies the 30-94, the largest of the 30series Rotrex superchargers. You can see this charger has a 3" inlet . This charger is capable of over 400hp. Here is the compressor map for the 30-94 You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
05-29-2011, 09:49 AM
(This post was last modified: 06-08-2011 10:43 PM by Jan.)
Post: #2
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
here is what it does........
You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
05-29-2011, 09:50 AM
Post: #3
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
saved for later
You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
05-29-2011, 09:50 AM
Post: #4
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
saved for later
You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
05-29-2011, 05:38 PM
Post: #5
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
Now when you say front mount...do you mean Front mount intercooler?
|
|||
05-29-2011, 05:49 PM
Post: #6
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
(05-29-2011 05:38 PM)llabmik2 Wrote: Now when you say front mount...do you mean Front mount intercooler? correct............. FMIC You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
05-29-2011, 05:49 PM
Post: #7
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount) | |||
05-31-2011, 07:23 PM
Post: #8
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
It could use a top mount, why not.
“Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
05-31-2011, 07:32 PM
Post: #9
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
(05-31-2011 07:23 PM)ColinGreene Wrote: It could use a top mount, why not. correct, we are making this kit with a top mount too, it will need the big throttle body and inlet pipe You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
05-31-2011, 07:54 PM
Post: #10
|
|||
|
|||
RE: RMW 30-94 Rotrex kit (front mount)
We could also probably do a front mount for the smaller blower correct? that is if the customer was willing to forgo air conditoning
“Have you ever noticed how some people never
have the money to do it right, but can always find the money to do it twice ?” |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)