You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Aquamist HFS-3 and MINI Tank GB
10-19-2011, 01:44 PM
Post: #521
RE: Aquamist HFS-3 and MINI Tank GB
(10-19-2011 11:33 AM)ThumperMCS Wrote:  Welcome to the out of warranty party Smile

Can you get a video of the noise? In general, the whole R56 valvetrain is incredibly noisey...

It sounds exactly like the same metal/metal smacking sound you get with the "death rattle" except instead of being able to put your ear up to the front of the engine (as in the passenger side), you can tell its definitely coming from the center of the engine (where the coils are), aka the cylinders

'08 R56S DS/B | RMW Dynotuned | Aquamist HFS-3 | Helix FMIC | Riss Racing Catless DP | Custom 2.5" Magnaflow | AEM Dryflow | Konig Feathers | Mach V Springs | Bilstein Struts | GT Spec SB | Eibach RSB | + Lots More |
[Image: 6332825639_439db82b03.jpg]
Find all posts by this user
Quote this message in a reply
10-19-2011, 08:09 PM
Post: #522
RE: Aquamist HFS-3 and MINI Tank GB
(10-19-2011 01:44 PM)BostonR56S Wrote:  It sounds exactly like the same metal/metal smacking sound you get with the "death rattle" except instead of being able to put your ear up to the front of the engine (as in the passenger side), you can tell its definitely coming from the center of the engine (where the coils are), aka the cylinders

That's concerning...lol

2006 MINI Cooper S JCW GP (R53)--GP #1599
-RMW FUNstick Cam, RMW Shorty Header, RMW 450cc inj
2014 MINI Cooper (F56)--Midnight Black
Find all posts by this user
Quote this message in a reply
10-19-2011, 09:38 PM
Post: #523
RE: Aquamist HFS-3 and MINI Tank GB
Thanks Blake. At least I got an iPhone 4s now
Lol

'08 R56S DS/B | RMW Dynotuned | Aquamist HFS-3 | Helix FMIC | Riss Racing Catless DP | Custom 2.5" Magnaflow | AEM Dryflow | Konig Feathers | Mach V Springs | Bilstein Struts | GT Spec SB | Eibach RSB | + Lots More |
[Image: 6332825639_439db82b03.jpg]
Find all posts by this user
Quote this message in a reply
10-19-2011, 10:22 PM
Post: #524
RE: Aquamist HFS-3 and MINI Tank GB
My car does that too.
Find all posts by this user
Quote this message in a reply
10-20-2011, 01:51 AM
Post: #525
RE: Aquamist HFS-3 and MINI Tank GB
mines in and done, just need to back the threshold off a bit. and find a way to hook up the dimmer wire.
Not a good night on the Dyno, my clutch has finally given up the ghost. Otherwise i would have made 280 possibly

[Image: tumblr_m1rdjx4Vwg1qzkikho1_250.gif]
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
Find all posts by this user
Quote this message in a reply
10-20-2011, 09:50 AM
Post: #526
RE: Aquamist HFS-3 and MINI Tank GB
(10-19-2011 09:38 PM)BostonR56S Wrote:  At least I got an iPhone 4s now
Lol

Yep that's all that matters! If our cars blow up we can just ask Siri what to do Big Grin

2006 MINI Cooper S JCW GP (R53)--GP #1599
-RMW FUNstick Cam, RMW Shorty Header, RMW 450cc inj
2014 MINI Cooper (F56)--Midnight Black
Find all posts by this user
Quote this message in a reply
10-21-2011, 12:59 PM
Post: #527
RE: Aquamist HFS-3 and MINI Tank GB
Anybody using a jug other than the one they buy their methanol in to store it?

I saw VP has some race fuel ones, are they sufficient for storing methanol?
or would the plastic gas tanks work? I heard somewhere it won't, but want to make sure what I can and can't....

'08 R56S DS/B | RMW Dynotuned | Aquamist HFS-3 | Helix FMIC | Riss Racing Catless DP | Custom 2.5" Magnaflow | AEM Dryflow | Konig Feathers | Mach V Springs | Bilstein Struts | GT Spec SB | Eibach RSB | + Lots More |
[Image: 6332825639_439db82b03.jpg]
Find all posts by this user
Quote this message in a reply
10-21-2011, 01:14 PM
Post: #528
RE: Aquamist HFS-3 and MINI Tank GB
I purchased the VP plastic 5gal container with a long pour spout and it works fine.
Find all posts by this user
Quote this message in a reply
10-21-2011, 01:28 PM (This post was last modified: 10-21-2011 01:29 PM by BostonR56S.)
Post: #529
RE: Aquamist HFS-3 and MINI Tank GB
Do you actually store your mixture in there? It'll evap if not airtight right? Or do you just use it when you need to mix your solution and use it to pour?

And do you have a good way of getting it out of the 5gal jug without pouring it all over yourself? lol
siphon?

'08 R56S DS/B | RMW Dynotuned | Aquamist HFS-3 | Helix FMIC | Riss Racing Catless DP | Custom 2.5" Magnaflow | AEM Dryflow | Konig Feathers | Mach V Springs | Bilstein Struts | GT Spec SB | Eibach RSB | + Lots More |
[Image: 6332825639_439db82b03.jpg]
Find all posts by this user
Quote this message in a reply
10-21-2011, 01:39 PM
Post: #530
RE: Aquamist HFS-3 and MINI Tank GB
(10-21-2011 01:28 PM)BostonR56S Wrote:  Do you actually store your mixture in there? It'll evap if not airtight right? Or do you just use it when you need to mix your solution and use it to pour?

And do you have a good way of getting it out of the 5gal jug without pouring it all over yourself? lol
siphon?


This is what I use.
I know it is expensive, but I fill the meth tank on average every two days and plan on haveing it for a long time so it will be cheep per use.

2010 MCS - RMW Tune, JCW Stage 1 CAI, Helix FMIC, Akropovic High Flow DP, JCW Mid Pipe, JCW Stage 1 Muffler, 17x7 O.Z. Ultraleggera, JCW Sport Suspension, Aquamist hfs-3 kit
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 60 Guest(s)