RMW Forums
›
RMW
›
Announcements
›
RMW ANNOUNCEMENTS 
RMW has rotors and pads for your1st and 2nd gen stock calipers!
RMW has rotors and pads for your1st and 2nd gen stock calipers!
|
RMW has rotors and pads for your1st and 2nd gen stock calipers!
|
|
06-16-2012, 09:36 AM
(This post was last modified: 06-22-2012 10:45 AM by Jan.)
Post: #1
|
|||
|
|||
|
RMW has rotors and pads for your1st and 2nd gen stock calipers!
Using the same rotor technology and pad technology from the BrakeMan we have developed a superb system that will outlast any of the pads and rotors you are currently using AND it will stop faster too!
Finally there is a quality upgrade for stock brake systems. Super Brakes are a thermally processed complete pad and rotor upgrade. They not only deliver 3-5 times the rotor life than OE parts, but also increase overall braking performance by 30%. The Brake Man has adapted technology gained from over 35 years of racing experience to manufacture superior street and fleet brake components. Super Brakes are a direct replacement for factory components, requiring no modification, and they will not void any warranty. Super Brake rotors undergo a proprietary extended thermal process, eliminating internal stresses found in most cast rotors. This increases rotor longeveity and thermal capability, and reduces or eliminates warping. Our process is more dynamic than standard "cryo" treatment. Super Brake pads are available in several compounds to meet specific vehicle needs. Each compound offers and improvement in torque output and pad life than similar stock or aftermarket compounds. Improved feel provides more driver confidence and comfort, The pads are processed to eliminate complicated bed-in. Extending life and improving performance will reduce down time, overall cost of ownership, and lower stopping distances. Fleet vehicles will see major life increases and cost reduction. Personal and Performance vehicles will enjoy improved life and enhanced feel. $825 for front/rear pads and rotors! ![[Image: rmw1.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/rmw1.jpg) ![[Image: rmw2.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/rmw2.jpg) ![[Image: rmw3.jpg]](http://i1129.photobucket.com/albums/m520/jbskers/rmw3.jpg) You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... ![[Image: 76V0TaO.png?1]](http://i.imgur.com/76V0TaO.png?1) |
|||
|
|
06-16-2012, 10:13 AM
Post: #2
|
|||
|
|||
|
RMW has rotors and pads for your1st and 2nd gen stock calipers!
Jan is it only for the stock size or even JCW brake kit? Also is this pad works good with slotted and drilled rotors?
Powered by RMW |
|||
|
|
|
06-16-2012, 11:57 AM
Post: #3
|
|||
|
|||
|
RE: RMW has rotors and pads for your1st and 2nd gen stock calipers!
Is there an application for R53 JCW brakes?
|
|||
|
|
|
06-16-2012, 12:49 PM
Post: #4
|
|||
|
|||
|
RE: RMW has rotors and pads for your1st and 2nd gen stock calipers!
Works on JCW. brakes
You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
06-16-2012, 12:53 PM
Post: #5
|
|||
|
|||
|
Re: RMW has rotors and pads for your1st and 2nd gen stock calipers!
This just might have to be my next set of pads and rotors!
![[Image: aiB8nAt.png?1]](http://i.imgur.com/aiB8nAt.png?1) |
|||
|
|
|
06-16-2012, 01:00 PM
Post: #6
|
|||
|
|||
|
Re: RMW has rotors and pads for your1st and 2nd gen stock calipers!
Oh sure, right after I pay to 2nd day new rear pads and rotors you drop this!
Jan did you ever get my email? Sent from my DROID RAZR using Tapatalk 2 |
|||
|
|
|
06-16-2012, 03:44 PM
Post: #7
|
|||
|
|||
|
RE: RMW has rotors and pads for your1st and 2nd gen stock calipers!
Crap... just bought new rotors.
![[Image: HPLCuz.gif]](http://cdn.makeagif.com/media/8-18-2014/HPLCuz.gif) |
|||
|
|
|
06-16-2012, 03:52 PM
Post: #8
|
|||
|
|||
|
RE: RMW has rotors and pads for your1st and 2nd gen stock calipers!
I am on a plane again
i will check it when i get there You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
06-16-2012, 07:26 PM
Post: #9
|
|||
|
|||
|
RE: RMW has rotors and pads for your1st and 2nd gen stock calipers!
I'm pretty sure I'll need to rotors and pads soon. Will let you know when I do!
|
|||
|
|
|
06-22-2012, 10:46 AM
Post: #10
|
|||
|
|||
|
RE: RMW has rotors and pads for your1st and 2nd gen stock calipers!
final pricing is in...........$825 for front/rear pads and rotors!!!!
Guaranteed to work better than what you have! You should never underestimate the predictability of stupidity "Tuning Matters" minimark Wrote: ....as silent as a freshly fallen snow on a crisp winter morning, a deafening hush falls across the land of Kool-Aid..... |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)