|
Aquamist HFS-3 and MINI Tank GB
|
|
09-23-2011, 06:05 PM
Post: #411
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-22-2011 05:06 PM)BostonR56S Wrote: Tomorrow after work will be the real install. I expect to get everything wired. Will just need to tap the hole after that. Update? 
RMW tune | JCW exhaust | Helix FMIC | Howerton / Aquamist HFS-3 Life is hard. But life is really hard if you're stupid. |
|||
|
|
09-23-2011, 06:16 PM
Post: #412
|
|||
|
|||
Aquamist HFS-3 and MINI Tank GB
(09-23-2011 02:50 PM)ThumperMCS Wrote: An R56 on a flatbed...... Things just got worse. I talked to Motoring Magic (local shop) and they said it looks like something called the "switch control module" seems to be bad and it is $700 just for the part. They're worried about putting in a new one in case it is somehow related to my install. This is really sucking the excitement out of my water/meth upgrade... |
|||
|
|
|
09-23-2011, 08:40 PM
Post: #413
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-23-2011 06:16 PM)LASRGUY Wrote: This is really sucking ... I feel for you. Hope it works out OK. 9 out of the 10 voices in my head are telling me to "Floor it!"
|
|||
|
|
|
09-23-2011, 09:23 PM
(This post was last modified: 09-23-2011 09:24 PM by HbSean.)
Post: #414
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-23-2011 06:16 PM)LASRGUY Wrote:If you can get the Part ID and I can see if my buddy that works at a MINI dealer can get it cheaper(09-23-2011 02:50 PM)ThumperMCS Wrote: An R56 on a flatbed...... |
|||
|
|
|
09-24-2011, 08:37 AM
(This post was last modified: 09-24-2011 08:38 AM by BostonR56S.)
Post: #415
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-23-2011 06:05 PM)silhouette88 Wrote:(09-22-2011 05:06 PM)BostonR56S Wrote: Tomorrow after work will be the real install. I expect to get everything wired. Will just need to tap the hole after that. Ran the loom from the trunk to the engine bay. Omg was that a bitch on a jack stand and a car that's been in the rain all day. Got wet AND sore from twisting in every direction (c'mon I set it up perfectly, insert jokes!!). The rest should be easy, I've been in and out of that rubber hole so many times now( insert another). Lol, aka the firewall grommet. Trunk is all set. Just gotta wire controller wires, tap ecu, mount flow sensor, and tap holes. Btw couldn't find the tap at home depot.... Where'd u guys get yours R u positive you tapped the right ecu wires and fuse? (09-23-2011 06:16 PM)LASRGUY Wrote:(09-23-2011 02:50 PM)ThumperMCS Wrote: An R56 on a flatbed...... '08 R56S DS/B | RMW Dynotuned | Aquamist HFS-3 | Helix FMIC | Riss Racing Catless DP | Custom 2.5" Magnaflow | AEM Dryflow | Konig Feathers | Mach V Springs | Bilstein Struts | GT Spec SB | Eibach RSB | + Lots More | ![[Image: 6332825639_439db82b03.jpg]](http://farm7.staticflickr.com/6236/6332825639_439db82b03.jpg) |
|||
|
|
|
09-24-2011, 08:54 AM
Post: #416
|
|||
|
|||
| RE: Aquamist HFS-3 and MINI Tank GB | |||
|
|
|
09-24-2011, 08:58 AM
Post: #417
|
|||
|
|||
|
RE: Aquamist HFS-3 and MINI Tank GB
It should need two. One for stock fuse one for additional I believe.... This could be your issue...?
'08 R56S DS/B | RMW Dynotuned | Aquamist HFS-3 | Helix FMIC | Riss Racing Catless DP | Custom 2.5" Magnaflow | AEM Dryflow | Konig Feathers | Mach V Springs | Bilstein Struts | GT Spec SB | Eibach RSB | + Lots More | |
|||
|
|
|
09-24-2011, 08:59 AM
Post: #418
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-24-2011 08:54 AM)LASRGUY Wrote:(09-24-2011 08:37 AM)BostonR56S Wrote: R u positive you tapped the right ecu wires and fuse?[quote='LASRGUY' It does need two fuses. The original goes back in the primary slot, the slot with the pigtail is the secondary and gets the fuse to power what you are "adding" in this case the controller. ![[Image: kennyjpg.jpg]](http://f00.inventorspot.com/images/kennyjpg.jpg) "When everything works, it's a sheer joy to drive." - Jeremy Clarkson
|
|||
|
|
09-24-2011, 09:07 AM
Post: #419
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-24-2011 08:59 AM)Howerton Engineering Wrote: It does need two fuses. The original goes back in the primary slot, the slot with the pigtail is the secondary and gets the fuse to power what you are "adding" in this case the controller. I'll cross my fingers that's the problem. That should have been obvious. I'm an electrical engineer. |
|||
|
|
|
09-24-2011, 09:39 AM
Post: #420
|
|||
|
|||
RE: Aquamist HFS-3 and MINI Tank GB
(09-24-2011 09:07 AM)LASRGUY Wrote: I'll cross my fingers that's the problem. That should have been obvious. I'm an electrical engineer. That sounds like good news. Missing a fuse is going to make things not work and hopefully makes for an easy fix. 9 out of the 10 voices in my head are telling me to "Floor it!"
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 39 Guest(s)